Thanks a lot Ivalio, i'll do some tests and report back.
Sent from my Huawei Mobile-------- Original Message -------- Subject: Re: [SR-Users] Kamailio IMS + Asterisk PBX From: Ivailo Dobrev To: [email protected] CC:
Hello,
Comment inline.
Hope I'm helping,
Ivo
On 11/21/2017 12:32 PM, Amar Tinawi wrote:
Thank you Daniel :
Actually i followed your
tutorial, but in case of IMS the modifications should be on
(my assumption) S-CSCF, in this case all routing block
should be routed towards AS ?
In order to route the call to Asterisk you should define it as
AS/MMtel in your HSS. Define proper TP and iFC for the subscriber
profiles.
i followed also Mr Carsten Bock videos on kamailio World conferences for the years 2015 - 2016 - 2017 and he mentioned clearly that any application that talk sip can operate as an AS, and he mentioned Asterisk and FreeSwitch as an example
Thanks Mojtaba, i followed this video but the video at the end shows that the users still in offline mode after registration, is that right ?
My questions are :
- should i configure Asterisk in a way to be AS for kamailio IMS ?
For
sure you should configure Asterisk to handle originating and
terminating call legs from/to S-CSCF. From Asterisk perspective
the easiest way is S-CSCF to be a SIP trunk. (Note that this may
not be 100% true and depends on the design)
- should the users be identified in Asterisk Database in order to make a correlation ? or asterisk can pull users profiles from HSS ?
As far
I know there is no DIAMETER/Sh support in Asterisk. Related and
to Q below too.
- Do
we have to perform any configuration over HSS to identify sh
interface with Asterisk ?
You have 2 options in general here, to have or not subscribers in
Asterisk. Easiest way is to not. Assuming that all your subscribers
are same from service point of view you can handle everything in
routing w/o having any subscriber profile in Asterisk. Second option
is a matter of design and there is no simple answer.
Keep in mind that SIP and IMS services differs. When using * or
FreeSWITCH as SIP MMtel w/ SIP clients in IMS env, you can
relatively easy implement known SIP services. Implementing MMTel IMS
services w/ IMS clients is a different story.
if you can send me the Astricon video it would be great
Thanks,
Ammar
_______________________________________________
Kamailio (SER) - Users Mailing List
[email protected]
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
|
_______________________________________________
Kamailio (SER) - Users Mailing List
[email protected]
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users