No, I did not. I did compile from the source on Centos. On Wed, 8 Mar 2023 at 8:34 pm, Henning Westerholt <[email protected]> wrote:
> Hello, > > > > you did install the kamailio debugging symbols from the package > management, right? > > > > Cheers, > > > > Henning > > > > *From:* Muhammad Danish Moosa <[email protected]> > *Sent:* Mittwoch, 8. März 2023 09:50 > *To:* Henning Westerholt <[email protected]> > *Cc:* Kamailio (SER) - Users Mailing List <[email protected]> > *Subject:* Re: [SR-Users] Kamailio stops processing the calls - restart > fixes it. > > > > Hi , > > > > I will apply memory config and will monitor. > > > > Strangely I dont see any errors related to memory in logs and nagios > graph does not show any spikes.There are only 30 concurrent calls. > > > > But in bt full suggests those ‘ no symbol table’ messages. Hopefully > memory optimisation will solve it. > > > > On Wed, 8 Mar 2023 at 7:23 pm, Henning Westerholt <[email protected]> wrote: > > Hello, > > > > you can check with „ps” to see the configured values for Kamailio. > > On Debian you can adapt it in /etc/default/kamailio > > > > For PKG pool, using 16 MB should be usually fine. For SHM pool, you could > use 1GB, depending on the server memory. Much more is usually not needed. > You should see some memory related errors in case you run into a low memory > situation in the log files. > > > > Cheers, > > > > Henning > > > > *From:* Muhammad Danish Moosa <[email protected]> > *Sent:* Mittwoch, 8. März 2023 09:11 > *To:* Henning Westerholt <[email protected]> > *Cc:* Kamailio (SER) - Users Mailing List <[email protected]> > *Subject:* Re: [SR-Users] Kamailio stops processing the calls - restart > fixes it. > > > > > > Hi Henning, > > > > Thanks for your email. > > > > Oh , I have not done the explicit config for shared and private memory > pool. Where can i see the related documentation? > > > > For 8G RAM , I am happy to allocate 5G for Kamailio. What config do you > recommend? > > > > > > On Wed, 8 Mar 2023 at 6:01 pm, Henning Westerholt <[email protected]> wrote: > > Hello, > > Just to sort out some easier reasons: do you increased the shared memory > pool and private memory pool in your configuration? The defaults are pretty > low. > > Cheers, > > Henning > > -- > Henning Westerholt – https://skalatan.de/blog/ > Kamailio services – https://gilawa.com > > > -----Original Message----- > From: Muhammad Danish Moosa <[email protected]> > Sent: Mittwoch, 8. März 2023 02:21 > To: Henning Westerholt <[email protected]> > Cc: Kamailio (SER) - Users Mailing List <[email protected]> > Subject: Re: [SR-Users] Kamailio stops processing the calls - restart > fixes it. > > Hi Guys, > > While I am still testing v 5.6.4 on my lab, Production server (v > 5.5.3) became unresponsive again. I took "bt full" to all processes and > have been analysing that. It looks like a memory allocation issue. > I see frequent occurrences of "No symbol table info available". This is a > purpose specific server with plenty of resources available including 8G RAM > and hardly a fraction of that is used. Only main services are redis and > Kamailio. I am not using mysql as well. It has only 30-40 concurrent > calls. . > > I have seen selinux is permissive and uimits has liberated values. Do I > need to do any other special OS level settings? Or is it really a version > upgrade required? Should I get rid of KEMI or do config directly in the cfg > file? > > I had seen another user reported that issue > https://github.com/kamailio/kamailio/issues/2380 and was advised to use v > 5.3.5, > > > This is pretty strange because I had experience with opensips before , > even with the very old version it used to handle 3k calls and literally > several years of non-interruptive function without a single restart or fine > tuning etc. Not sure I can attach the logs here , please see the excerpts > below. > > > Excerpts from bt full: > > Using host libthread_db library "/lib64/libthread_db.so.1". > 0x00007f5ec46fc980 in __pause_nocancel () from /lib64/libc.so.6 > #0 0x00007f5ec46fc980 in __pause_nocancel () from /lib64/libc.so.6 No > symbol table info available. > #1 0x000000000042dec6 in main_loop () at main.c:1904 > i = 8 > pid = 22833 > si = 0x0 > si_desc = "udp receiver child=7 > sock=10.10.16.240:5060 > \000:\000\000\000\001\000\000\000\376\177\000\000\260\232\000\000\000\000\000\000\300\305E\001\000\000\000\000\300\351\202\000k\000\000\000[̀", > '\000' <repeats 13 times>, > > "\340\311\337\333\376\177\000\000\030\342}\000\000\000\000\000\027\000\000\000\000\000\000\000@ > \300A\000\000\000\000" > nrprocs = 8 > woneinit = 1 > __FUNCTION__ = "main_loop" > #2 0x000000000043684b in main (argc=5, argv=0x7ffedbdfcac8) at main.c:3053 > cfg_stream = 0x1456040 > c = -1 > r = 0 > tmp = 0x0 > tmp_len = 0 > port = 0 > proto = 0 > ahost = 0x0 > aport = 0 > options = 0x7e1208 > ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:x:X:Y:" > ret = -1 > seed = 2616789248 > rfd = 4 > debug_save = 0 > debug_flag = 0 > dont_fork_cnt = 0 > n_lst = 0x7ffedbdfc980 > p = 0x0 > st = {st_dev = 19, st_ino = 21232, st_nlink = 2, st_mode = 16832, > st_uid = 0, st_gid = 0, __pad0 = 0, st_rdev = 0, st_size = 40, st_blksize = > 4096, st_blocks = 0, st_atim = {tv_sec = 1675551785, tv_nsec = 549443593}, > st_mtim = {tv_sec = 1677547400, tv_nsec = 664002717}, st_ctim = {tv_sec = > 1677547400, tv_nsec = 664002717}, __unused = {0, 0, 0}} > tbuf = "\377\377\377\377", '\000' <repeats 12 times>, > "\350sd\304^\177\000\000\310d3\305^\177", '\000' <repeats 90 times>, > "\200\022\254\000\000\000\000\000\200\304A\000\000\000\000\000\300\312\337\333\376\177", > '\000' <repeats 26 times>, "\356=\023\305^\177\000\000\001", '\000' > <repeats 23 times>... > option_index = 0 > long_options = {{name = 0x7e361f "help", has_arg = 0, flag = 0x0, > val = 104}, {name = 0x7de694 "version", has_arg = 0, flag = 0x0, val = > 118}, {name = 0x7e3624 "alias", has_arg = 1, flag = 0x0, val = 1024}, {name > = 0x7e362a "subst", has_arg = 1, flag = 0x0, val = 1025}, {name = 0x7e3630 > "substdef", has_arg = 1, flag = 0x0, val = 1026}, {name = 0x7e3639 > "substdefs", has_arg = 1, flag = 0x0, val = 1027}, {name = 0x7e3643 > "server-id", has_arg = 1, flag = 0x0, val = 1028}, {name = 0x7e364d > "loadmodule", has_arg = 1, flag = 0x0, val = 1029}, {name = 0x7e3658 > "modparam", has_arg = 1, flag = 0x0, val = 1030}, {name = 0x7e3661 > "log-engine", has_arg = 1, flag = 0x0, val = 1031}, {name = 0x7e366c > "debug", has_arg = 1, flag = 0x0, val = 1032}, {name = 0x7e3672 > "cfg-print", has_arg = 0, flag = 0x0, val = 1033}, {name = 0x7e367c > "atexit", has_arg = 1, flag = 0x0, val = 1034}, {name = 0x0, has_arg = 0, > flag = 0x0, val = 0}} > __FUNCTION__ = "main" > [Inferior 1 (process 22811) detached] > > > > > x00007f5ec47437fc in __lll_lock_wait_private () from /lib64/libc.so.6 > #0 0x00007f5ec47437fc in __lll_lock_wait_private () from /lib64/libc.so.6 > No symbol table info available. > #1 0x00007f5ec46bfba2 in _L_lock_16654 () from /lib64/libc.so.6 No symbol > table info available. > #2 0x00007f5ec46bc7e3 in malloc () from /lib64/libc.so.6 No symbol table > info available. > #3 0x00007f5ec46aea6a in open_memstream () from /lib64/libc.so.6 No > symbol table info available. > #4 0x00007f5ec472f65a in __vsyslog_chk () from /lib64/libc.so.6 No symbol > table info available. > #5 0x00007f5ec472fbbf in syslog () from /lib64/libc.so.6 No symbol table > info available. > #6 0x0000000000424070 in sig_usr (signo=17) at main.c:920 > __llevel = 3 > memlog = 0 > __FUNCTION__ = "sig_usr" > #7 <signal handler called> > No symbol table info available. > #8 0x00007f5ec46b9094 in _int_malloc () from /lib64/libc.so.6 No symbol > table info available. > #9 0x00007f5ec46bc78c in malloc () from /lib64/libc.so.6 No symbol table > info available. > #10 0x00007f5ec241fd0e in luaM_realloc_ () from /lib64/liblua-5.1.so No > symbol table info available. > #11 0x00007f5ec24239b8 in luaS_newlstr () from /lib64/liblua-5.1.so No > symbol table info available. > #12 0x00007f5ec2417b5a in lua_pushlstring () from /lib64/liblua-5.1.so No > symbol table info available. > #13 0x00007f5ec2427ad3 in emptybuffer () from /lib64/liblua-5.1.so No > symbol table info available. > #14 0x00007f5ec24288b9 in luaL_pushresult () from /lib64/liblua-5.1.so No > symbol table info available. > #15 0x00007f5ec242bb0b in read_chars () from /lib64/liblua-5.1.so No > symbol table info available. > #16 0x00007f5ec242bd32 in g_read () from /lib64/liblua-5.1.so No symbol > table info available. > #17 0x00007f5ec241c324 in luaD_precall () from /lib64/liblua-5.1.so No > symbol table info available. > #18 0x00007f5ec2426e57 in luaV_execute () from /lib64/liblua-5.1.so No > symbol table info available. > #19 0x00007f5ec241c74d in luaD_call () from /lib64/liblua-5.1.so No > symbol table info available. > #20 0x00007f5ec241ba6e in luaD_rawrunprotected () from /lib64/ > liblua-5.1.so No symbol table info available. > #21 0x00007f5ec241c8da in luaD_pcall () from /lib64/liblua-5.1.so No > symbol table info available. > #22 0x00007f5ec241844d in lua_pcall () from /lib64/liblua-5.1.so No > symbol table info available. > #23 0x00007f5ec2660cbc in app_lua_run_ex (msg=0x7f5ec3f20a78, > func=0x7f5ec26804ae "ksr_request_route", p1=0x0, p2=0x0, p3=0x0, > emode=1) at app_lua_api.c:713 > n = 0 > ret = 0 > txt = {s = 0x7ffedbdfbb38 "Z\336P", len = 22679472} > bmsg = 0x0 > ltop = 17 > __FUNCTION__ = "app_lua_run_ex" > #24 0x00007f5ec264a6c9 in sr_kemi_config_engine_lua (msg=0x7f5ec3f20a78, > rtype=1, rname=0x0, rparam=0x0) at > app_lua_mod.c:119 > ret = -1 > __FUNCTION__ = "sr_kemi_config_engine_lua" > #25 0x00000000004a2592 in sr_kemi_route (keng=0xae6060 > <_sr_kemi_eng_list>, msg=0x7f5ec3f20a78, rtype=1, ename=0x0, > edata=0x0) at core/kemi.c:3471 > sfbk = 0 > ret = 7 > #26 0x00000000005dc9aa in receive_msg (buf=0xad0020 <buf.7142> "REFER sip: > 192.168.10.100:5060;transport=tcp SIP/2.0\r\nVia: SIP/2.0/UDP > 192.168.10.184:5060;branch=z9hG4bK04B64e74bc7ae4d17c8\r\nVIA: > SIP/2.0/TLS 52.114.20.29:5061;branch=z9hG4bK2280db05\r\nFrom: \"Danish > Queue\""..., len=1366, rcv_info=0x7ffedbdfc200) at core/receive.c:488 > msg = 0x7f5ec3f20a78 > > > > > Using host libthread_db library "/lib64/libthread_db.so.1". > 0x00007f5ec47437fc in __lll_lock_wait_private () from /lib64/libc.so.6 > #0 0x00007f5ec47437fc in __lll_lock_wait_private () from /lib64/libc.so.6 > No symbol table info available. > #1 0x00007f5ec46bfba2 in _L_lock_16654 () from /lib64/libc.so.6 No symbol > table info available. > #2 0x00007f5ec46bc7e3 in malloc () from /lib64/libc.so.6 No symbol table > info available. > #3 0x00007f5ec46aea6a in open_memstream () from /lib64/libc.so.6 No > symbol table info available. > #4 0x00007f5ec472f65a in __vsyslog_chk () from /lib64/libc.so.6 No symbol > table info available. > #5 0x00007f5ec472fbbf in syslog () from /lib64/libc.so.6 No symbol table > info available. > #6 0x0000000000424070 in sig_usr (signo=17) at main.c:920 > __llevel = 3 > memlog = 0 > __FUNCTION__ = "sig_usr" > #7 <signal handler called> > No symbol table info available. > #8 0x00007f5ec46b908a in _int_malloc () from /lib64/libc.so.6 No symbol > table info available. > #9 0x00007f5ec46bc78c in malloc () from /lib64/libc.so.6 No symbol table > info available. > #10 0x00007f5ec241fd0e in luaM_realloc_ () from /lib64/liblua-5.1.so No > symbol table info available. > #11 0x00007f5ec24239b8 in luaS_newlstr () from /lib64/liblua-5.1.so No > symbol table info available. > #12 0x00007f5ec2417b5a in lua_pushlstring () from /lib64/liblua-5.1.so No > symbol table info available. > #13 0x00007f5ec2427ad3 in emptybuffer () from /lib64/liblua-5.1.so No > symbol table info available. > #14 0x00007f5ec24288b9 in luaL_pushresult () from /lib64/liblua-5.1.so No > symbol table info available. > #15 0x00007f5ec242bb0b in read_chars () from /lib64/liblua-5.1.so No > symbol table info available. > #16 0x00007f5ec242bd32 in g_read () from /lib64/liblua-5.1.so No symbol > table info available. > #17 0x00007f5ec241c324 in luaD_precall () from /lib64/liblua-5.1.so No > symbol table info available. > #18 0x00007f5ec2426e57 in luaV_execute () from /lib64/liblua-5.1.so No > symbol table info available. > #19 0x00007f5ec241c74d in luaD_call () from /lib64/liblua-5.1.so No > symbol table info available. > #20 0x00007f5ec241ba6e in luaD_rawrunprotected () from /lib64/ > liblua-5.1.so No symbol table info available. > #21 0x00007f5ec241c8da in luaD_pcall () from /lib64/liblua-5.1.so No > symbol table info available. > #22 0x00007f5ec241844d in lua_pcall () from /lib64/liblua-5.1.so No > symbol table info available. > #23 0x00007f5ec2660cbc in app_lua_run_ex (msg=0x7f5ec3f26158, > func=0x7f5ec26804ae "ksr_request_route", p1=0x0, p2=0x0, p3=0x0, > emode=1) at app_lua_api.c:713 > n = 0 > ret = 0 > txt = {s = 0x7ffedbdfbb38 "Z\336P", len = 22689984} > bmsg = 0x0 > ltop = 17 > __FUNCTION__ = "app_lua_run_ex" > #24 0x00007f5ec264a6c9 in sr_kemi_config_engine_lua (msg=0x7f5ec3f26158, > rtype=1, rname=0x0, rparam=0x0) at > app_lua_mod.c:119 > ret = -1 > __FUNCTION__ = "sr_kemi_config_engine_lua" > #25 0x00000000004a2592 in sr_kemi_route (keng=0xae6060 > <_sr_kemi_eng_list>, msg=0x7f5ec3f26158, rtype=1, ename=0x0, > edata=0x0) at core/kemi.c:3471 > sfbk = 0 > ret = 7 > #26 0x00000000005dc9aa in receive_msg (buf=0xad0020 <buf.7142> "REFER sip: > 192.168.10.100:5060;transport=tcp SIP/2.0\r\nVia: SIP/2.0/UDP > 192.168.10.184:5060;branch=z9hG4bK08B977c11fc3b3ee498\r\nVIA: > SIP/2.0/TLS 52.114.20.29:5061;branch=z9hG4bKed64125d\r\nFrom: \"Danish > Queue\""..., len=1372, rcv_info=0x7ffedbdfc200) at core/receive.c:488 > msg = 0x7f5ec3f26158 > ctx = {rec_lev = 259, run_flags = 0, last_retcode = 1677719528, > jmp_env = {{__jmpbuf = {8717649, 0, 2, 0, 22808048, 0, 0, 140045002453120}, > __mask_was_saved = 8, __saved_mask = {__val = {8589934604, 528280977410, > 257698037764, 1, 39600, 21349824, 0, 0, 0, 140732587295568, 8311117, > 4309056, 8573144, 1372, 140044999523263, 0}}}}} > bctx = 0x0 > ret = 0 > tvb = {tv_sec = 1677719528, tv_usec = 404766} > tve = {tv_sec = 0, tv_usec = 0} > diff = 0 > inb = {s = 0xad0020 <buf.7142> "REFER > sip:192.168.10.100:5060;transport=tcp > SIP/2.0\r\nVia: SIP/2.0/UDP > 192.168.10.184:5060;branch=z9hG4bK08B977c11fc3b3ee498\r\nVIA: > SIP/2.0/TLS 52.114.20.29:5061;branch=z9hG4bKed64125d\r\nFrom: \"Danish > Queue\""..., len = 1372} > netinfo = {data = {s = 0x0, len = 0}, rcv = 0x0, dst = 0x0} > keng = 0xae6060 <_sr_kemi_eng_list> > evp = {data = 0x7ffedbdfbd30, obuf = {s = 0x0, len = 0}, rcv = > 0x7ffedbdfc200, dst = 0x0, req = 0x0, rpl = 0x0, rplcode = 0, mode = 0} > cidlockidx = 0 > cidlockset = 0 > errsipmsg = 0 > exectime = 1 > __FUNCTION__ = "receive_msg" > #27 0x000000000047e32e in udp_rcv_loop () at core/udp_server.c:543 > len = 1372 > buf = "REFER sip:192.168.10.100:5060;transport=tcp > SIP/2.0\r\nVia: SIP/2.0/UDP > 192.168.10.184:5060;branch=z9hG4bK08B977c11fc3b3ee498\r\nVIA: > SIP/2.0/TLS 52.114.20.29:5061;branch=z9hG4bKed64125d\r\nFrom: \"Danish > Queue\""... > tmp = 0x7f5ebd6c48f0 "" > fromaddr = 0x7f5ec3eec738 > fromaddrlen = 16 > rcvi = {src_ip = {af = 2, len = 4, u = {addrl = {3088058890, 0}, > addr32 = {3088058890, 0, 0, 0}, addr16 = {2570, 47120, 0, 0, 0, 0, 0, 0}, > addr = "\n\n\020\270", '\000' <repeats 11 times>}}, dst_ip = {af = 2, len = > 4, u = {addrl = {4027582986, 0}, addr32 = {4027582986, 0, 0, 0}, addr16 = > {2570, 61456, 0, 0, 0, 0, 0, 0}, addr = "\n\n\020\360", '\000' <repeats 11 > times>}}, src_port = 5060, dst_port = 5060, proto_reserved1 = 0, > proto_reserved2 = 0, src_su = {s = {sa_family = 2, sa_data = > "\023\304\n\n\020\270\000\000\000\000\000\000\000"}, sin = {sin_family = 2, > sin_port = 50195, sin_addr = {s_addr = 3088058890}, sin_zero = > "\000\000\000\000\000\000\000"}, sin6 = {sin6_family = 2, sin6_port = > 50195, sin6_flowinfo = 3088058890, sin6_addr = {__in6_u = {__u6_addr8 = > '\000' <repeats 15 times>, __u6_addr16 = {0, 0, 0, 0, 0, 0, 0, 0}, > __u6_addr32 = {0, 0, 0, 0}}}, sin6_scope_id = 0}, sas = {ss_family = 2, > __ss_padding = "\023\304\n\n\020\270", '\000' <repeats 111 times>, > __ss_align = 0}}, bind_address = 0x7f5ec3ec6308, rflags = (unknown: > 0), proto = 1 '\001', proto_pad0 = 0 '\000', proto_pad1 = 0} > evp = {data = 0x0, obuf = {s = 0x0, len = 0}, rcv = 0x0, dst = > 0x0, req = 0x0, rpl = 0x0, rplcode = 0, mode = 0} > printbuf = "REFER sip:192.168.10.100:5060;transport=tcp > SIP/2.0 0D 0A Via: SIP/2.0/UDP 192.168.10.184:5060;branch=z9hG4bK0D > \000A > \000\300\337\333\376\177\000\000\351\305h\301^\177\000\000\330Ђ\000\000\000\000\000\a\000\000\000\004\000\000\000P\301\337\333\376\177\000\000\267\343T\000\000\000\000\000\360\016\201\000\000\000\000\000\360׀\000\000\000\000\000\004\000\000\000\000\000\000\000\004\000\000\000\004\000\000\000\230\337h\301^\177\000\000\334\001"... > i = 100 > j = 106 > l = 4 > __FUNCTION__ = "udp_rcv_loop" > #28 0x000000000042b3a5 in main_loop () at main.c:1730 > i = 3 > pid = 0 > si = 0x7f5ec3ec6308 > si_desc = "udp receiver child=3 > sock=192.168.10.240:5060 > \000:\000\000\000\001\000\000\000\376\177\000\000\260\232\000\000\000\000\000\000\300\305E\001\000\000\000\000\300\351\202\000k\000\000\000[̀", > '\000' <repeats 13 times>, > > "\340\311\337\333\376\177\000\000\030\342}\000\000\000\000\000\027\000\000\000\000\000\000\000@ > \300A\000\000\000\000" > nrprocs = 8 > woneinit = 1 > __FUNCTION__ = "main_loop" > #29 0x000000000043684b in main (argc=5, argv=0x7ffedbdfcac8) at main.c:3053 > cfg_stream = 0x1456040 > c = -1 > r = 0 > tmp = 0x0 > tmp_len = 0 > port = 0 > proto = 0 > ahost = 0x0 > aport = 0 > options = 0x7e1208 > ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:x:X:Y:" > ret = -1 > seed = 2616789248 > rfd = 4 > debug_save = 0 > debug_flag = 0 > dont_fork_cnt = 0 > n_lst = 0x7ffedbdfc980 > p = 0x0 > st = {st_dev = 19, st_ino = 21232, st_nlink = 2, st_mode = 16832, > st_uid = 0, st_gid = 0, __pad0 = 0, st_rdev = 0, st_size = 40, st_blksize = > 4096, st_blocks = 0, st_atim = {tv_sec = 1675551785, tv_nsec = 549443593}, > st_mtim = {tv_sec = 1677547400, tv_nsec = 664002717}, st_ctim = {tv_sec = > 1677547400, tv_nsec = 664002717}, __unused = {0, 0, 0}} > tbuf = "\377\377\377\377", '\000' <repeats 12 times>, > "\350sd\304^\177\000\000\310d3\305^\177", '\000' <repeats 90 times>, > "\200\022\254\000\000\000\000\000\200\304A\000\000\000\000\000\300\312\337\333\376\177", > '\000' <repeats 26 times>, "\356=\023\305^\177\000\000\001", '\000' > <repeats 23 times>... > option_index = 0 > > On Fri, Mar 3, 2023 at 12:50 AM Henning Westerholt <[email protected]> wrote: > > > > Hi Muhammad, > > > > Great, thanks for the feedback. There is also > https://rpm.kamailio.org/centos/ - maybe this works for you. > > > > Cheers, > > > > Henning > > > > -----Original Message----- > > From: Muhammad Danish Moosa <[email protected]> > > Sent: Donnerstag, 2. März 2023 14:50 > > To: Henning Westerholt <[email protected]> > > Cc: Kamailio (SER) - Users Mailing List <[email protected]> > > Subject: Re: [SR-Users] Kamailio stops processing the calls - restart > fixes it. > > > > Hi Henning, > > > > Yes , setting acc_function modparam to an empty string fixed the issue. > > > > Thank you so much. > > > > I am using CentOS Linux release 7.6.1810 (Core) , I had to compile. > > > > On Fri, Mar 3, 2023 at 12:41 AM Henning Westerholt <[email protected]> > wrote: > > > > > > Hello, > > > > > > please keep the list in the mail flow. > > > > > > Have you tried to set the acc_function modparam to an empty string, as > commented in the linked issue? > > > > > > modparam("uac_redirect","acc_function","") > > > > > > If you don't need the acc function from the uac_redirect. > > > > > > Regarding the other warnings, they should be fixed - but different > compilers can report different warnings, so it's sometimes happening. If > they are just warnings, they should not create an issue. > > > > > > If you are using Debian/Ubuntu you can just use the prebuild packages > from deb.kamailio.org - you don't need to build by yourself. > > > > > > Cheers, > > > > > > Henning > > > > > > -----Original Message----- > > > From: Muhammad Danish Moosa <[email protected]> > > > Sent: Donnerstag, 2. März 2023 14:25 > > > To: Henning Westerholt <[email protected]> > > > Subject: Re: [SR-Users] Kamailio stops processing the calls - restart > fixes it. > > > > > > Hi, > > > > > > I tried to install 5.6.4 > > > (https://www.kamailio.org/pub/kamailio/5.6.4/src/) and get this error. > > > > > > > > > Mar 3 00:05:39 lab-danish /usr/local/sbin/kamailio[24642]: INFO: rr > > > [rr_mod.c:188]: mod_init(): outbound module not available Mar 3 > 00:05:39 lab-danish /usr/local/sbin/kamailio[24642]: ERROR: > > > uac_redirect [../../modules/acc/acc_api.h:191]: acc_load_api(): cannot > find bind_acc Mar 3 00:05:39 lab-danish /usr/local/sbin/kamailio[24642]: > ERROR: > > > uac_redirect [uac_redirect.c:259]: redirect_init(): cannot bind to ACC > API Mar 3 00:05:39 lab-danish /usr/local/sbin/kamailio[24642]: ERROR: > > > <core> [core/sr_module.c:975]: init_mod(): Error while initializing > > > module uac_redirect > > > (/usr/local/lib64/kamailio/modules/uac_redirect.so) > > > > > > It seems this issue was reported earlier and supposed to be fixed but > apparently it's not. > > > > > > https://github.com/kamailio/kamailio/issues/3188 > > > > > > Besides that , I had seen warnings during compilation. What should be > the most tested and supported version ? > > > > > > Example Warnings: > > > > > > dmq_funcs.c: In function ‘ki_dmq_send_message’: > > > dmq_funcs.c:303:3: warning: missing braces around initializer > [-Wmissing-braces] > > > dmq_peer_t new_peer = {0}; > > > ^ > > > dmq_funcs.c:303:3: warning: (near initialization for > > > ‘new_peer.peer_id’) [-Wmissing-braces] > > > dmq_funcs.c: In function ‘ki_dmq_bcast_message’: > > > dmq_funcs.c:373:3: warning: missing braces around initializer > [-Wmissing-braces] > > > dmq_peer_t new_peer = {0}; > > > ^ > > > dmq_funcs.c:373:3: warning: (near initialization for > > > ‘new_peer.peer_id’) [-Wmissing-braces] > > > CC (gcc) [M dmq.so] notification_peer.o > > > CC (gcc) [M dmq.so] dmq.o > > > dmq.c:61:1: warning: missing braces around initializer > > > [-Wmissing-braces] sip_uri_t dmq_server_uri = {0}; > > > > > > On Wed, Mar 1, 2023 at 7:26 PM Henning Westerholt <[email protected]> > wrote: > > > > > > > > Hello, > > > > > > > > better take the latest one, e.g. 5.6.4 released yesterday. Minor > releases only contains bugfixes, documentation enhancements and similar. > Only rarely regressions happen. But you should of course test it. > > > > > > > > Cheers, > > > > > > > > Henning > > > > > > > > -----Original Message----- > > > > From: Muhammad Danish Moosa <[email protected]> > > > > Sent: Mittwoch, 1. März 2023 09:22 > > > > To: Henning Westerholt <[email protected]> > > > > Cc: Kamailio (SER) - Users Mailing List > > > > <[email protected]> > > > > Subject: Re: [SR-Users] Kamailio stops processing the calls - > restart fixes it. > > > > > > > > Thank you for your email. > > > > > > > > Is v5.6.1 (July 6, 2022) stable? > > > > > > > > obtained from > > > > > > > > https://www.kamailio.org/pub/kamailio/latest-stable-version-number > > > > > > > > > > > > On Wed, Mar 1, 2023 at 5:50 PM Henning Westerholt <[email protected]> > wrote: > > > > > > > > > > Hello, > > > > > > > > > > hard to say without more information, a backtrace etc... As I > first step, I would suggest you to update the system to one of the > supported releases, e.g. the latest 5.6.x or 5.5.x. > > > > > > > > > > Cheers, > > > > > > > > > > Henning > > > > > > > > > > -----Original Message----- > > > > > From: Muhammad Danish Moosa <[email protected]> > > > > > Sent: Mittwoch, 1. März 2023 01:39 > > > > > To: [email protected] > > > > > Subject: [SR-Users] Kamailio stops processing the calls - restart > fixes it. > > > > > > > > > > Hi, > > > > > > > > > > I have a very simple proxy (stateful) where kamailio acts as a > proxy between 2 endpoints. Everything works fine for weeks and suddenly I > see kamailio stops responding. From pcap I can see kamailio is not proxying > the session progress and bombarding invites to one endpoint without any > reason. Even that invite was stripped on the Body part. > > > > > > > > > > Restarting kamailio fixes it immediately. Unfortunately I could > not take bt full yet. > > > > > > > > > > Version is > > > > > > > > > > kamailio 5.5.3 (x86_64/linux) 473cef > > > > > > > > > > configuration is very simple , routing is based on tm.t_relay ( > based on KEMI). > > > > > > > > > > Any help will be welcome. > > > > > > > > > > Danish > > > > > > > > > > > > > > > > > > > > -- > > > > > Muhammad Danish Moosa > > > > > __________________________________________________________ > > > > > Kamailio - Users Mailing List - Non Commercial Discussions To > > > > > unsubscribe send an email to [email protected] > > > > > Important: keep the mailing list in the recipients, do not reply > only to the sender! > > > > > Edit mailing list options or unsubscribe: > > > > > > > > > > > > > > > > -- > > > > Muhammad Danish Moosa > > > > > > > > " The core of mans' spirit comes from new experiences. "___ > > > > Christopher McCandless > > > > > > > > > > > > -- > > > Muhammad Danish Moosa > > > > > > " The core of mans' spirit comes from new experiences. "___ > > > Christopher McCandless > > > > > > > > -- > > Muhammad Danish Moosa > > > > " The core of mans' spirit comes from new experiences. "___ > > Christopher McCandless > > > > -- > Muhammad Danish Moosa > > " The core of mans' spirit comes from new experiences. "___ Christopher > McCandless > > -- > > Muhammad Danish Moosa > > " The core of mans' spirit comes from new experiences. "___ Christopher > McCandless > > -- > > Muhammad Danish Moosa > > " The core of mans' spirit comes from new experiences. "___ Christopher > McCandless > -- Muhammad Danish Moosa " The core of mans' spirit comes from new experiences. "___ Christopher McCandless
__________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions To unsubscribe send an email to [email protected] Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe:
