Hello Richard,
Thank you for your reply. As you suggested, I tried and had no luck. Please
find the attached file for error log information. I can't see any errors.
But, I couldn't able to see rtpengine.conf file in the VM. Am I missing
something? Please advise me to move forward and thank you in advance.
Best Regards,
Chandramouli.
On Tue, Sep 16, 2025 at 7:54 PM Richard Fuchs via sr-users <
sr-users@lists.kamailio.org> wrote:
> Use the LTS branch mr12.5. It has the required PIE flags included.
>
> Cheers
>
>
> On 15/09/2025 11.43, Chandramouli P via sr-users wrote:
>
> Hello Sergy,
>
> Good morning and thank you for your reply. Somehow, I wasn't able to login
> to my pastebin account. Please find the error that I am getting in the
> attached file. Thank you.
>
> Best regards,
> Chandramouli.
>
> On Mon, Sep 15, 2025 at 5:43 PM Sergei Safarov <s.safa...@gmail.com>
> wrote:
>
>> Pastebin is no available more.
>> Please post again.
>>
>> On Sat, 2025-09-13 at 13:43 +0530, Chandramouli P wrote:
>>
>> Hello Sergey,
>>
>> Good morning and thank you for your reply. As you suggested, I tried to
>> compile the mr12.4 version and getting the below error:
>>
>> *https://pastebin.com/fc54vv9T <https://pastebin.com/fc54vv9T>*
>>
>> Please advise me to move forward and thank you in advance.
>>
>> Best Regards,
>> Chandramouli.
>>
>>
>>
>>
>>
>> On Fri, Sep 12, 2025 at 11:15 PM Sergey Safarov <s.safa...@gmail.com>
>> wrote:
>>
>> Looks like you're trying to build the master branch
>> I use https://github.com/sipwise/rtpengine/commits/mr12.4 branch on
>> CentOS 8
>> Probably this should also work for Rocky 8
>> After you compile this branch, you can build for a more recent branch.
>>
>>
>> On Fri, Sep 12, 2025 at 5:11 PM Chandramouli P via sr-users <
>> sr-users@lists.kamailio.org> wrote:
>>
>> Hello Alex,
>>
>> Good morning and thank you for your reply. As you suggested, I followed
>> and tried to install RTPEngine on Rocky Linux 8.x. But, I'm still getting
>> errors.
>>
>> Please find the installation steps that I followed here:
>> *https://pastebin.com/wi4YtbKZ
>> <https://pastebin.com/wi4YtbKZ>*
>>
>> Please find the complete error description here:
>> *https://pastebin.com/LbgYQMGb
>> <https://pastebin.com/LbgYQMGb>*
>>
>> Please advise me to move forward and thank you in advance.
>>
>> Best Regards,
>> Chandramouli.
>>
>>
>>
>> On Wed, Sep 10, 2025 at 8:04 PM Alex Balashov <abalas...@evaristesys.com>
>> wrote:
>>
>> It would be hard to share a step-by-step guide as I don't have one handy
>> and it would be labourious to set up a fresh host for the express purpose
>> of writing one for you, but I do this routinely on EL8 and Rocky 8, and
>> have done so dozens of times.
>>
>> Tips:
>>
>> - You will need EPEL.
>>
>> - You will need the CBR repository or whatever has replaced PowerTools in
>> Rocky 8.
>>
>> Otherwise, it's just installing the dependencies until you get there.
>>
>> -- Alex
>>
>> > On Sep 10, 2025, at 10:07 AM, Chandramouli P via sr-users <
>> sr-users@lists.kamailio.org> wrote:
>> >
>> > Hello,
>> >
>> > I tried a lot to install RTPEngine on RHEL 8.x and as well as in Rocky
>> Linux 8.x also using different sources. But, I am facing a lot of issues
>> like libraries issues, dependencies issues, conflict issues etc. Anyone
>> successfully installed RTPEngine on RHEL 8.x or Rocky Linux 8.x (Not on
>> CentOS)? If so, could you please share the documentation step-by-step or
>> web URL? Thanks in advance.
>> >
>> > Best regards,
>> > Chandramouli.
>> > __________________________________________________________
>> > Kamailio - Users Mailing List - Non Commercial Discussions --
>> sr-users@lists.kamailio.org
>> > To unsubscribe send an email to sr-users-le...@lists.kamailio.org
>> > Important: keep the mailing list in the recipients, do not reply only
>> to the sender!
>>
>> --
>> Alex Balashov
>> Principal Consultant
>> Evariste Systems LLC
>> Web: https://evaristesys.com, https://www.csrpswitch.com
>> Tel: +1-706-510-6800
>>
>> __________________________________________________________
>> Kamailio - Users Mailing List - Non Commercial Discussions --
>> sr-users@lists.kamailio.org
>> To unsubscribe send an email to sr-users-le...@lists.kamailio.org
>> Important: keep the mailing list in the recipients, do not reply only to
>> the sender!
>>
>>
>>
> __________________________________________________________
> Kamailio - Users Mailing List - Non Commercial Discussions --
> sr-users@lists.kamailio.org
> To unsubscribe send an email to sr-users-le...@lists.kamailio.org
> Important: keep the mailing list in the recipients, do not reply only to the
> sender!
>
> __________________________________________________________
> Kamailio - Users Mailing List - Non Commercial Discussions --
> sr-users@lists.kamailio.org
> To unsubscribe send an email to sr-users-le...@lists.kamailio.org
> Important: keep the mailing list in the recipients, do not reply only to
> the sender!
>
{\rtf1\ansi\ansicpg1252\cocoartf2822
\cocoatextscaling0\cocoaplatform0{\fonttbl\f0\fnil\fcharset0 HelveticaNeue;}
{\colortbl;\red255\green255\blue255;}
{\*\expandedcolortbl;;}
\paperw11900\paperh16840\margl1440\margr1440\vieww11520\viewh8400\viewkind0
\deftab560
\pard\pardeftab560\slleading20\partightenfactor0
\f0\fs26 \cf0 cd rtpengine\
git pull origin mr12.5\
\pard\pardeftab560\slleading20\pardirnatural\partightenfactor0
\cf0 git status\
On branch mr12.5\
Your branch is up to date with 'origin/mr12.5'.\
cd daemon\
make\
*******************\
*******************\
\pard\pardeftab560\slleading20\partightenfactor0
\cf0 ( echo '/******** GENERATED FILE ********/' && \\\
echo '#line 1' && \\\
cat ../lib/"mvr2s_x64_avx512.S" ) > "mvr2s_x64_avx512.S"\
cc -c -o mvr2s_x64_avx512.o mvr2s_x64_avx512.S\
cc -rdynamic -flto=auto -pie -g -Wall -Wextra -Wno-sign-compare -Wno-unused-parameter -Wstrict-prototypes -Werror=return-type -Wshadow -pthread -std=c11 -I. -I../kernel-module/ -I../lib/ -D_GNU_SOURCE -DFIXTURES_PATH="\\"../fixtures\\"" -DWITH_TRANSCODING -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -pthread -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/ffmpeg -I/usr/include/ffmpeg -I/usr/include/ffmpeg -I/usr/include/ffmpeg -I/usr/include/ffmpeg -I/usr/include/opus -D_GNU_SOURCE -D_DEFAULT_SOURCE -DHAVE_BCG729 -DRTPENGINE_VERSION="\\"git-mr12.5-4e765353\\"" -DHAVE_LIBSYSTEMD -O3 -flto=auto -ffat-lto-objects -fPIE -o rtpengine-perftest main.o log.o codeclib.strhash.o loglib.o auxlib.o resample.o str.o dtmflib.o rtplib.o poller.o ssllib.o bufferpool.o mvr2s_x64_avx2.o mvr2s_x64_avx512.o -lm -ldl -lglib-2.0 -lgthread-2.0 -pthread -lglib-2.0 -lavcodec -lavformat -lavutil -lswresample -lavfilter -lspandsp -lopus -lncursesw -ltinfo -lssl -lcrypto -lbcg729 -lsystemd -latomic\
make[1]: Leaving directory '/usr/local/src/rtpengine/perf-tester'\
\pard\pardeftab560\slleading20\pardirnatural\partightenfactor0
\cf0 \
}__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions --
sr-users@lists.kamailio.org
To unsubscribe send an email to sr-users-le...@lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the
sender!
