After I installed the remaining parts of X11 my make worked successfully
today. I'm now proceeding with building keys.
I'm really a rookie at this stuff. So a quick question. SSH must be
installed on all machines, remote and local? Seems like that should be the
case but it never hurts to ask...thanks...bill
At 09:58 AM 4/25/00 -0400, Vicki Lonell Hain wrote:
>Now I'm starting to wonder why the install went so well on my 4.3.2 machine!
>
>Bill Cook wrote:
>
> > Hi Vicki,
> >
> > I'm experiencing the same problem with XAUTH that you ran into. And I'm
> > installing under AIX 4.3.3 where one would think the "make" would work. My
> > experience with the patch also was the same as yours. I've not yet edited
> > the Makefile files though I probably will give it a try. Also I revisited
> > my AIX installation to make sure that all of X11 was installed. Some parts
> > were not. I've sinced installed them and that's where I'm at this
> > morning. So keep posting if you find anything that works and I'll do the
> > same. It's a little maddening.
> >
> > By the way, I'll be headed to your neck of the woods in June...going to the
> > outer banks.
> >
> > Regards,
> >
> > Bill Cook
> > Penn State University
> > 814-863-3642
> >
> > At 02:49 PM 4/24/00 -0400, Vicki Lonell Hain wrote:
> > > I brought the ssh 2.1.0 version back over. Ran
> configure. Edited all
> > >(!) the Makefile files and the sshconf.h file to add the reference to
> > >XAUTH path. The compile successfully ran past the xauth this time,
> but now it
> > >bombs on this:
> > >===============================
> > > cc -I. -I. -I../.. -I. -I../.. -I../..
> > >-I../../include -I./../../include -DETCDIR=\"/etc\"
> > >-DSSH_BINDIR=\"/usr/local/bin\" -DHAVE_CONFIG_H -I. -I. -I../.. -g -c
> > >sshfilecopy.c
> > >"sshfilecopy.h", line 127.1: 1506-120 (S) Function cannot return a const
> > >qualified type.
> > >"sshfilecopy.c", line 138.25: 1506-120 (S) Function cannot return a const
> > >qualified type.
> > >make: 1254-004 The error code from the last command is 1.
> > >========
> > >whew. I'm getting tired of this. You must be getting tired of it too.
> > >But if you have any ideas about what I can do with this compile error,
> that
> > >would be great.
> > >many thanks! vicki
> > >
> > >
> > >
> > >[EMAIL PROTECTED] wrote:
> > >
> > > > hmmm ... I really need to see it to figure it out. If I can get non
> root
> > > > access. I can make a diif for you.
> > > >
> > > > other thing you could do is cut and paste all output from
> the commands I
> > > > gave you especially
> > > > the configure. and give me an ls -l of the ssh package directory.
> there is
> > > > a file configure.cache or
> > > > configure.sh with lots of variables.. that can be fixed. An ls -l
> on the
> > > > ssh-version.1/ directory would help.
> > > >
> > > > Are you on AOL Instant messenger.. my screen name is edgyct.. If I
> have the
> > > > output I might be about to talk
> > > > you though it.
> > > >
> > > > EdGy
> > > >
> > > > |--------+----------------------->
> > > > | | Vicki Lonell |
> > > > | | Hain |
> > > > | | <vicki_hain@u|
> > > > | | nc.edu> |
> > > > | | Sent by: |
> > > > | | [EMAIL PROTECTED]|
> > > > | | ibm.com |
> > > > | | |
> > > > | | |
> > > > | | 04/21/00 |
> > > > | | 04:24 PM |
> > > > | | |
> > > > |--------+----------------------->
> > > >
> >---------------------------------------------------------------------|
> > > |
|
> > > | To: Edward
Geraghty/Somers/IBM@IBMUS |
> > > > | cc:
> |
> > > | From:
|
> > > | Subject: Re: ssh2 &
AIX |
> > > > |
> |
> > >
>---------------------------------------------------------------------|
> > >
> > > > Hi Edgy,
> > > > I did that ... but then I'm back where I started, with ssh2
> getting
> > > > the XAUTH compile error. (!)
> > > > thanks, Vicki
> > > >
> > > > [EMAIL PROTECTED] wrote:
> > > >
> > > > > Hello,
> > > > >
> > > > > Copying shared libraried from an AIX 4.3.X to AIX v4.1.5 machine
> > > > > is a sure way to get a broken machine.. What you need to do is
> recompile
> > > > > the code on the 4.1.5 machine.
> > > > >
> > > > > First copy the ssh distribution to 4.1.5 machine from 4.3 machine.
> > > > > Then
> > > > > make distclean
> > > > > or
> > > > > make clean
> > > > >
> > > > > rerun ./configure
> > > > > then make
> > > > > then make install
> > > > >
> > > > > EdGy
> > >
> > >--
> > >Vicki Lonell Hain
> > >Systems Programming - AIS
> > >Unix Distributed Computing
> > >UNC-Chapel Hill, NC 27588-1150
> > >[EMAIL PROTECTED]
> > >(919)966-1901
> > >www.ais.unc.edu/info/sys/vlh.html
> > >
>
>--
>Vicki Lonell Hain
>Systems Programming - AIS
>Unix Distributed Computing
>UNC-Chapel Hill, NC 27588-1150
>[EMAIL PROTECTED]
>(919)966-1901
>www.ais.unc.edu/info/sys/vlh.html
>
