This is most oddd...I cannot get an email with an attachment to post on the 
site???

This is the message I get???

This report relates to a message you sent with the following header fields:

  Message-id: <[EMAIL PROTECTED]>
  Date: Mon, 07 Nov 2005 12:15:13 -0800
  From: Tony <[EMAIL PROTECTED]>
  To: [email protected]
  Subject: pictures I hope

Your message cannot be delivered to the following recipients:

  Recipient address: [email protected]
  Reason: Illegal host/domain name found

I have posted pictures before...is there a limit to the amount of pictures 
you can post in a given time???

Hellllp!  ...Tony



----- Original Message ----- 
From: "Terry Griner" <[EMAIL PROTECTED]>
To: "Small-scale live steam discussions" <[email protected]>
Sent: Monday, November 07, 2005 10:50 AM
Subject: Re: [SSLiveSteam] More Wobbler Food For Thought


> Tony,
>  That is how I got started in all this as well. I still try to work on
> the Cheap, but I did get a small Taig lathe for a combined birthday and
> fathers day gift. I haven't gotten too far on it yet, but it is fun!
>
> The smallest wobbler I have ever seen was in the front of a brass
> engine, in 'HO' scale! The tender held the butane and the burner, the
> engine was a little boiler, and in the smoke box was a tiny wobler
> spinning a flywheel that linked to the worm gear for the locomotive! It
> was great!!
>
> I have also enjoyed what you have written and would like to try building
> an enclosed tram... Once I've finished laying track and all the other
> projects I have pending!
>
> Thanks,
> Terry Griner
> 387-0902
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Tony
> Sent: Monday, November 07, 2005 11:45 AM
> To: [email protected]
> Subject: [SSLiveSteam] More Wobbler Food For Thought
>
> Hi Steve...and wobbler fans...
>
> Wobblers are neat in that for a folk like me I can make a steam engine
> for little money and without a lathe...well sort of without a lathe!!!
>
> Most of my wobblers I make from K&S brass tube...it is allready round
> and has a hole down the middle!
>
> Not making light of having a proper lathe...I would love to have one!
>
> The pistons that I make up are of 3/8" or 1/2"  brass rodding that I
> found scrap some where...a couple of feet of it has lasted me 20 years
> of building with lots left for another 20 years if I can be so lucky. I
> made one tiny wobbler single acting from 3/16" brass rod...drilled and
> lapped on my verticle table drill...sort of a poor mans lathe.
>
> My modeling budjet or lack of one has put me on a path of doing things
> on the cheap...finding old Mamod cylinders fo me is like finding gold.
> Lots of folks have upgraded to IP and I have been able to accquire the
> Mamod discards. Mamod cylinders are quite well thought out... Inside is
> a very smart piece of engineering...not like the early Mamod stationary
> engines with a solid piston...and if you were lucky a grove had been
> machined in it to act like a seal.
>
> Most early Mamod stationary engines with their low pressure boilers
> (12lbs) relied on the fact that their was lots of condesed water in the
> steam...the water would get into the grove and help with cylinder
> sealing...in fact putting nice dry steam into them made them run worse.
>
> The Mamod piston is spring loaded on it's rod...with a couple of little
> seals front and back...this lets the piston "float" in the cylinder and
> self center...rather cool when you want to mass produce a prescion
> assembly without having to lap etc...
>
> A fairly new producer of steam motors have taken the lowly wobbler to
> new levels...Chedder aside... the new wobblers from SVS are little
> jewels. I am attaching a couple of pictures of the steam motor and a
> small tram "Lucy" that I was commissioned to make. The SVS is TINY...the
> whole motor with reduction drive fits into a 30 by 40mm cube...another
> commission I am working on will use one in an "O"
> scale 2P british outline live steam...the boiler will be gas/butane
> fired internal Belpar with a grate suitable for real coal...90% of the
> heat will be from the Butane...the coal will provide a little of the
> heat but 100% of real coal smoke...sort of cheating but a scale "O"
> scale fire box is only 20 by 30mm...with a fire box door about as big
> around as your thumb!
>
> A single acting wobbler with a decent flywheel will pull a 20LB train
> that I mentioned in another eMail...because the cylinder is single
> acting and because there is only the ONE cylinder the motor it uses
> 1/4 the amount of a steam motor that has TWO double acting IP
> cylinders...!
>
> There is another wonderful thing that a single acting wobbler can do
> that a slide valve cylinder can't! ...at least in the model sizes that
> we deal with as in Roundhouse/Accucraft etc ...is that when a wobbler
> cylinder runs fast you start to get steam cut off...'cause the cylinder
> cannot fill fully on its power stroke...that is the cylinder is moving
> accross the port so quicly that there is not enough time for it to fill
> properly ...neat huh!
>
> This takes us into a whole new realm of wobblers that is the size of the
> steam inlet port and it's shape...for those who have not fallen to sleep
> by now...ya I really like wobblers cause you can do a lot of
> experimentation with them that you can't withe slide valve.
>
> I have tried different hole sizes and shapes and get wonderful
> results...I can tailor the steam motor to the expected power and speed
> of the finished model. Besides the inlet and outlet sizes the timing of
> wobblers can drastically change the power and speed of them to...that is
> the spacing of the steam ports in the block have a major impact into the
> speed of the motor...just like timing an electric motor by changing the
> position of the comutator...these steam motors can be timmed...
>
> Thats enough for tonight a lot to take in...I hope along the line some
> one will get some help for their sick wobblers...
>
> ...Steve we will get there...lots to try yet...Tony
> _______________________________________________
> SSLiveSteam mailing list
> Send messages: [email protected] Cancel subscription:
> http://postfix.45mm.com/mailman/listinfo/sslivesteam
> Rules: http://www.45mm.com/sslivesteam_guide.html
>
>
> "This e-mail is intended for the sole use of the intended recipient and 
> may
> contain privileged, sensitive, or protected health information. If you are
> not the intended recipient, be advised that the unauthorized use, 
> disclosure,
> copying, distribution, or action taken in reliance on the contents of this
> communication is prohibited. If you have received this e-mail in error,
> please notify the sender via telephone or return e-mail and immediately
> delete this e-mail."
>
> _______________________________________________
> SSLiveSteam mailing list
> Send messages: [email protected]
> Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
> Rules: http://www.45mm.com/sslivesteam_guide.html
>
> 


_______________________________________________
SSLiveSteam mailing list
Send messages: [email protected]
Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
Rules: http://www.45mm.com/sslivesteam_guide.html

Reply via email to