Hi Terry,

Would you consider the "Taig" lathe a good lathe for the beginner? ...I have 
heard that name before the other that I have heard is the "Unimat"?

Most of the model stuff that I would like to be able to do is the boring of 
brass stock to make a wobbler design that I would like to try...and the 
turning of small cast wheels...there is a firm in the UK that make diecast 
iron wheels but they need to be turned for tread/flange etc...you can have 
them turn them but the raw castings are about 1/3 the price as finished. 
Most of the wheels I would turn would be to a maximum size of 50mm...any 
thoughts would be appreciated.

...now to try another picture post...I have not been to lucky today with 
that...but I see one just got through...I will put it on seperate cover...I 
maybe writing too much and using up all the space and nothing is left for 
the picture.

Thanks for the interest in the tram...if I can get the deWinton picture to 
post I think that you would find it interesting but NOT a first engine...the 
boiler problems I had with it took place over a period of 12 months...The IP 
boiler and fire box is a good way to go and the Roundhouse wheel and side 
rods can't be beat for me ...anyway. And the steam motor made from single 
Mamod will get you over many stumbling blocks and get a steamer up and 
running fast.

Tony


>  That is how I got started in all this as well. I still try to work on
> the Cheap, but I did get a small Taig lathe for a combined birthday and
> fathers day gift. I haven't gotten too far on it yet, but it is fun!
>Once I've finished laying track and all the other
> projects I have pending!


_______________________________________________
SSLiveSteam mailing list
Send messages: [email protected]
Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
Rules: http://www.45mm.com/sslivesteam_guide.html

Reply via email to