On Tuesday, January 7, 2003, at 11:35 PM, Frank & Susan Malinowski 
wrote:

> I am thinking of going to DSL access at home and I would also want to 
> be
> able to use my Powerbook G4Ti400.

        I have DSL with all my Macs networked together. In particular, I have 
a G4 Titanium and a StarMax 3000. The Ti is wireless/Airport and the SM 
is hardwired. (There is an iMac (hardwired) and a venerable Mac II 
(hardwired), and even a MacPlus in the mix too!)

        If all you have are two computers, then all you need is the Airport. 
It is trivial to set up what amounts to 2 two CPU LAN. The SM connects 
to the Airport LAN port via a cable, the DSL connects via cable to the 
WAN port of the Airport, and the Ti book goes wireless. Very simple 
really. If you want to add more CPUS with Airport cards, no problem. 
The Airport handles multiple CPUs. I really like the Airport wireless 
freedom for the laptop, and everyone else I have talked to who have 
gone this route has also. So if you can afford it, get it.

        What gets a bit more complicated is if you need to hook up another CPU 
via a CABLE to your LAN (such as what I have done). In this case you 
will need a switch or a hub to farm out the DSL line to every computer. 
I recommend a switch, since it is asynchronous and multiple lines do 
not share the same bandwidth as you would do with a simple hub. This is 
useful for your local network. I often play DVD, animations, music over 
my LAN. The Ti & iMac have T1000 and can push a serious number of bytes 
across the network. Of course, when you go outside to the world, you 
will need to share DSL bandwidth, so a hub vs switch in that case makes 
little difference.

        Now given switch/hub + Airport + DSL, there are many ways to hook them 
up. The way I have it is the DSL goes into the Airport, the Airport to 
the switch, the switch to the hardwired CPUs. I do it this way because 
the Airport acts a firewall and prevents unauthorized access of my home 
machines from the outside. The Airport is the gateway from my LAN to 
the WAN and provides DCHP & NAT services. Works quite well. The 
Airport, BTW can be configured for dial-in access into your LAN/WAN/DSL 
if you do desire.

        Let me also add that until the DSL line was installed, the Airport 
connected to the internet via PPP/modem and this worked well too. Of 
course sharing a 22.8k line was not so fun, but for small stuff it 
wasn't so bad.

==================================================================
                                                   Michael Martin
                                          [EMAIL PROTECTED]
==================================================================


-- 
StarMax is sponsored by <http://lowendmac.com/> and...

    /      Buy books, CDs, videos, and more from Amazon.com     \
   / <http://www.amazon.com/exec/obidos/redirect-home/lowendmac> \

      Support Low End Mac <http://lowendmac.com/lists/support.html>

StarMax list info:      <http://lowendmac.com/lists/starmax.html>
  --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/starmax%40mail.maclaunch.com/>

Using a Mac? Free email & more at Applelinks! http://www.applelinks.com

Reply via email to