I'm not sure where else to report this so I figured this is a good starting point. When running any version of snv, or even solaris10u2 with a QLogic 2Gb or 4Gb HBA running the qlc driver, and a 4xxx (QLogic iSCSI card), the system will not boot. It hangs loading the iSCSI driver. If you run the QLA driver for both the iSCSI card and the HBA, it boots fine. Clearly there is some sort of conflict going between the qlc FC and qla iSCSI drivers.
If you need any other info or if I should report this elsewhere, just let me know :) --Tim This message posted from opensolaris.org _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
