Tim Cook wrote:
So I just purchased an AoC-SAT2-MV8 so that I could have native sata support. The motherboard is a DFI LANPARTY UT SLI-DR. Previously I had my sata drives hooked up to the onboard sil3112 sata controller. I installed the AOC, hooked up the sata drives to it, and now the system hangs when coming up. It gets to the hostname screen and never continues beyond that point. I can ping the box, and the keyboard is still active (IE: numlock/capslock still turn on/off), but I cannot ssh in or do much of anything with the box. If I have no drives plugged in to the controller, it will boot OK.
As for what the drives are doing, I have 4 sata drives and 3 ata drives in a raid-z pool.
Suggestions?
There is very little information here. What do you mean it gets to the hostname
screen? Are you trying to bring up X? Or Are you talking about when the system
is booting the hostname gets printed and nothing after that? Please provide me
with /var/adm/messages. Also run "prtconf -pv" and "prtconf -D" and provide
me with the output. Did you do a reconfigure reboot after installing the
SATA controller? What type of hard drives are you trying to attach? (name,
model size, firmware revision).
Regards,
Lida
This message posted from opensolaris.org
_______________________________________________
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
_______________________________________________
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
