Hello, This is my first stab setting up a iscsi target. I am unable to make the connection on the initiator side.
The Initiator OS is OSX 10.5 using GlobalSAN Initiator. http://www.studionetworksolutions.com/products/product_detail.php?pi=11 Darwin mini.local 9.1.0 Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386 i386 The target OS is: SunOS Rathskeller 5.11 snv_76 i86pc i386 i86pc SVM device d60 is a mirrored. I do not have enough knowledge/experience to have a warm fuzzy with ZFS (troubleshooting, etc) for all my media. I'll be playing with ZFS later -- right now it's good ol svm. Commands I used to setup iscsi target: iscsitadm create target -b /dev/md/dsk/d60 media iscsitadm modify admin -H (username) iscsitadm modify admin -C (chap secret) # iscsitadm list target -v Target: media iSCSI Name: iqn.1986-03.com.sun:02:1445033b-7f0e-6a04-f41e-a9e370091f21.media Connections: 0 ACL list: TPGT list: LUN information: LUN: 0 GUID: 0100000fb5f9300200002a00473f4516 VID: SUN PID: SOLARIS Type: disk Size: 422G Backing store: /dev/md/dsk/d60 Status: online Does this look correct? On the initiator side. The globalSAN software reports connected -- but notice the connections line from above -- Still reporting 0 ?? I believe it "should be" reporting 1 if it is truly connected. Back to the initiator side, I do not see any new disk devices. I do not have any iscsi related messages. What other diags can I run that might help me troubleshoot the problem? Thanks, Chris This message posted from opensolaris.org _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
