I doubt this is a problem with the Solaris Target.  I've posted in the 
GlobalSAN Forums several times, as have others, all seeing similar 
problems.   The first time I used it I could see the target but not 
create a device for it.  Following attempts weren't so successful.  I've 
tried other target implementations with similar effect. 

I haven't re-attempted the GlobalSAN Initiator since upgrading to 
Leopard, but I keep my eyes open for a new release every couple weeks.

benr.


Chris wrote:
> Hello,
> This is my first stab setting up a iscsi target. I am unable to make the 
> connection on the initiator side. 
>
> The Initiator OS is OSX 10.5 using GlobalSAN Initiator.
> http://www.studionetworksolutions.com/products/product_detail.php?pi=11
> Darwin mini.local 9.1.0 Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 
> 2007; root:xnu-1228.0.2~1/RELEASE_I386 i386   
>
> The target  OS is:
> SunOS Rathskeller 5.11 snv_76 i86pc i386 i86pc
> SVM device d60 is a mirrored. I do not have enough knowledge/experience to 
> have a warm fuzzy with ZFS (troubleshooting, etc) for all my media. I'll be 
> playing with ZFS later -- right now it's good ol svm.
> Commands I used to setup iscsi target:
>
> iscsitadm create target -b /dev/md/dsk/d60 media
> iscsitadm modify admin -H (username)
> iscsitadm modify admin -C (chap secret)
>
> # iscsitadm list target -v
> Target: media
>     iSCSI Name: 
> iqn.1986-03.com.sun:02:1445033b-7f0e-6a04-f41e-a9e370091f21.media
>     Connections: 0
>     ACL list:
>     TPGT list:
>     LUN information:
>         LUN: 0
>             GUID: 0100000fb5f9300200002a00473f4516
>             VID: SUN
>             PID: SOLARIS
>             Type: disk
>             Size:  422G
>             Backing store: /dev/md/dsk/d60
>             Status: online
>
> Does this look correct?
> On the initiator side. The globalSAN software reports connected -- but notice 
> the connections line  from above -- Still reporting 0 ?? I believe it "should 
> be" reporting 1 if it is truly connected. 
> Back to the initiator side, I do not see any new disk devices. 
>
> I do not have any iscsi related messages. 
> What other diags can I run that might help me troubleshoot the problem?
>
> Thanks,
> Chris
>  
>  
> This message posted from opensolaris.org
> _______________________________________________
> storage-discuss mailing list
> [email protected]
> http://mail.opensolaris.org/mailman/listinfo/storage-discuss
>   

_______________________________________________
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss

Reply via email to