Andrew M. Hettinger wrote: > Thank you for your reply, I hope this clarifies both the problem I am > seeing, as well as provides enough information to serve as a > starting point. > > When the SATA controller is in a PCI-X (64 bit) slot, on the first > reboot, the system hangs indefinitely at the 3-lines starting with > "SunOS Release 5.11 Version snv_82 64-bit" When the SATA controller > is in a PCI (32bit) slot (this is a bit of a feat, as there it a > heatsink in the way... suffice it to say, it involves a riser that we > use for blades) it boots normally on the first boot. When installed > on the onboard AHCI chipset it works fine as well (this is not a > viable solution, as I am using far more sata ports then any mainboard > provides).
Andrew, Have you ever installed Linux on any of your disks? I've seen similar msgs and symptoms when re-using disks for an OpenSOlaris install on which I've had Linux installed. I've raised a bug about it: *Change Request ID*: 6662383 This could be completely left-field so please ignore if it is... R. _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
