I'm experiencing a weird hang when attempting to hotplug devices on a Marvell88sx card.
I can issue: cfgadmin -c disconnect <device> and the device is unconfigured and disconnected without problems. If I then replace the device (or attempt to use the same device): cfgadmin -c connect <device> the command hangs and my syslogs start filling up with: Apr 1 22:52:00 unknown marvell88sx: [ID 517869 kern.info] SError interrupt Apr 1 22:52:00 unknown marvell88sx: [ID 517869 kern.info] 10-bit to 8-bit decode error Apr 1 22:52:00 unknown marvell88sx: [ID 517869 kern.info] Disparity error Eventually the machine becomes non-responsive. Attempting to re-issue the connect or disconnect commands results in: bash-3.2# cfgadm -c disconnect sata1/1 Disconnect the port: /devices/[EMAIL PROTECTED],0/pci8086,[EMAIL PROTECTED]/pci8086,[EMAIL PROTECTED],3/pci11ab,[EMAIL PROTECTED]:1 This operation will disable activity on the SATA port Continue (yes/no)? yes cfgadm: Hardware specific failure: Driver ioctl failed I/O error Anyone experienced this? This message posted from opensolaris.org _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
