On Wed, 2008-04-02 at 12:09 -0700, Lida Horn wrote: > Phil wrote: > > I'm experiencing a weird hang when attempting to hotplug devices on a > > Marvell88sx card. > > > > I can issue: > > > > cfgadmin -c disconnect <device> > > > > and the device is unconfigured and disconnected without problems. > > > > If I then replace the device (or attempt to use the same device): > > > > cfgadmin -c connect <device> > > > > the command hangs and my syslogs start filling up with: > > > > Apr 1 22:52:00 unknown marvell88sx: [ID 517869 kern.info] SError > > interrupt > > Apr 1 22:52:00 unknown marvell88sx: [ID 517869 kern.info] > > 10-bit to 8-bit decode error > > Apr 1 22:52:00 unknown marvell88sx: [ID 517869 kern.info] > > Disparity error > > > > Eventually the machine becomes non-responsive. > > > > Attempting to re-issue the connect or disconnect commands results in: > > > > bash-3.2# cfgadm -c disconnect sata1/1 > > Disconnect the port: /devices/[EMAIL PROTECTED],0/pci8086,[EMAIL > > PROTECTED]/pci8086,[EMAIL PROTECTED],3/pci11ab,[EMAIL PROTECTED]:1 > > This operation will disable activity on the SATA port > > Continue (yes/no)? yes > > cfgadm: Hardware specific failure: Driver ioctl failed I/O error > > > > > > Anyone experienced this? > I just tried this > > cfgadm -c disconnect sata5/7 > cfgadm -c connect sata5/7 > > and experienced no such problem. I was using sata v1.30 and marvell88sx > 1.24 of Solaris Nevada (OpenSolaris). > > Regards, > Lida
Hmm, interesting. Was there a drive connected to that port? I'm at a loss as to how to identify the problem here. This is a Supermicro MV8 card sitting in the 133Mhz PCI-X slot of an Intel 5000p board. Phil. _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
