i'm still fairly new at iSCSI, but you probably have mpxio enabled in your iscsi.conf:
# tail /kernel/drv/iscsi.conf # Global mpxio-disable property: # # To globally enable MPxIO on all iscsi ports set: # mpxio-disable="no"; # # To globally disable MPxIO on all iscsi ports set: # mpxio-disable="yes"; # mpxio-disable="no"; c1t0100000C76949240000002A0045DE016Ad0 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^ target num ^^^^^^^^^^^^^^ the target-num (tX) gets changed when multipathing/mpxio are involved. if mpxio is disabled, you'll get "short names", as you say. /andrew William Yang wrote: > In a lot of the documents and blogs online, when working with iSCSI > people seem to get a really long target ID (the GUID?) when working with > devices in /dev/dsk (e.g. c1t0100000C76949240000002A0045DE016Ad0). For > some reason, I get short target numbers much like on a local SCSI > controller (c1t0d0). Is there a configuration change to use GUIDs, or > is this a configuration change that needs to be made on the target side? > > I'm running Solaris 10 update 5 (x86 and SPARC). > > Thanks, > William Yang > > > ------------------------------------------------------------------------ > > _______________________________________________ > storage-discuss mailing list > [email protected] > http://mail.opensolaris.org/mailman/listinfo/storage-discuss _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
