I want to make sure what char device should I use, per format command:
$ pfexec format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c8t0d0 <DEFAULT cyl 60798 alt 2 hd 255 sec 63>
/p...@0,0/pci108e,5...@1f,2/d...@0,0
1. c8t1d0 <DEFAULT cyl 60799 alt 2 hd 255 sec 63>
/p...@0,0/pci108e,5...@1f,2/d...@1,0
I guess disk number 1 is the new one witch is "empty" and will be the target,
but witch of these two next devices should I use:
source: /dev/rdsk/c8t0d0p0 target: /dev/rdsk/c8t1d0p0
- OR -
source: /dev/rdsk/c8t0d0s0 target: /dev/rdsk/c8t1d0s0
"p" or "s", by partition or by slice???
Thanks in advace.
--
This message posted from opensolaris.org
_______________________________________________
storage-discuss mailing list
storage-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
