Using a voltage regulator is not a good idea. The grid frequency is apparently 60Hz as in the US. A better solution is replacing the motor pulley with a cylindrical wooden pulley of the right diameter. The normal grooved pulley on the intermediate shaft will keep the belt in place.
Peter Verhaart Powered by Telkomsel BlackBerry® -----Original Message----- From: "David G. LeVine" <[email protected]> Sender: "Stoves" <[email protected]> Date: Wed, 13 Feb 2013 00:25:42 To: Discussion of biomass cooking stoves<[email protected]> Reply-To: Discussion of biomass cooking stoves <[email protected]> Subject: Re: [Stoves] Calculating the RPM _______________________________________________ Stoves mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org for more Biomass Cooking Stoves, News and Information see our web site: http://www.bioenergylists.org/ _______________________________________________ Stoves mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org for more Biomass Cooking Stoves, News and Information see our web site: http://www.bioenergylists.org/
