Ron,
The citation is “T.R. Miles”. When you pyrolyze wood you generate char, gas (condensable and non-condensable) and condensable oils. The gas and oil can contain considerable water. One way to convert that delicious soup to a clean, combustible gas is to gasify it in a charcoal gasifier. There are pre-commercial systems underdevelopment to produce charcoal and clean gas using this method. I learned of making clean gas in this manner from a charcoal gasifier developed at the Tropical Products Institute in the UK in about 1975; in 1977 from E.R. Mellenger, Mellenger Gasodyne, New Brunswick, Canada; in 1975ff from our friend Eldon Beagle, Rice Husk Consultant, California; from managers of plants in France that were making charcoal and wood derived products at the time; and from others since then. See, for example: E.R. Mellenger in E.G. Baker, et. al “ASSESSMENT OF LARGE SCALE BIOMASS GASIFICATION SYSTEMS FOR LESS DEVELOPED COUNTRIES,” PNL 1985 <http://pdf.usaid.gov/pdf_docs/PNAAL767.pdf> http://pdf.usaid.gov/pdf_docs/PNAAL767.pdf Eldon Beagle, 1978, “Rice Husk conversion to energy”, FAO Agricultural services Bulleting 31, Rome, 1978. <http://www.scribd.com/doc/123119988/rice-hull-conversion-to-energy-1978> http://www.scribd.com/doc/123119988/rice-hull-conversion-to-energy-1978 In the TLUD you burn the pyrolysis products along with the gas due to the high oxidation. If you introduce char into the fuel bed of a TLUD it is likely that you will combust some of the char since it still contains some volatiles and the char burns in direct contact with air. Tom From: Ron [mailto:[email protected]] Sent: Sunday, April 28, 2013 2:33 PM To: [email protected]; Tom Miles Cc: Discussion of biomass cooking stoves; Paul Anderson Subject: Re: [Stoves] [biochar] TLUD advances -- Two more uses of char Tom et al Any cite for the 5-7% value? Your last sentence is confusing to me with the word "gasifying pyrolysis gases" in it. Paul is striving for only pyrolysis, and don't think he is proposing a packed charcoal bed. Ron On Apr 28, 2013, at 2:19 PM, "Tom Miles" <[email protected]> wrote: Paul, It’s a great idea to use char as a filler but there is a cost. I am sure that you will find that a small percentage of the charcoal “filler” will be consumed as charcoal will burn in direct contact with air or through reduction of the char. You will always have a little excess air or moisture in the bed. When charcoal is used as a packed bed for gasifying pyrolysis gases charcoal consumption is estimated at 5-7%. Tom From: Stoves [mailto:[email protected]] On Behalf Of Ron Sent: Sunday, April 28, 2013 1:08 PM To: [email protected]; Paul Anderson Cc: [email protected]; Eckhardt, Bradley D; Discussion of biomass cooking stoves Subject: Re: [Stoves] [biochar] TLUD advances -- Two more uses of char Paul et al This is to recognize and applaud the "char filler" suggestion you received from NASA's Dr. Jack Bacon. I like it and hope we can hear soon from some who may have tried it. My guess is that there is some maximum char volume above which Andrew's observation today of char combustion will prevail. You correctly talked of the pyrolysis front. Equally, users should be thinking about char combustion if any char particle gets hot enough while the upward flowing primary air still contains O2. Upflowing primary air can get to char easier than fuel since there will be no/little exiting gases from the char. Good note. Ron On Apr 28, 2013, at 10:01 AM, Paul Anderson <[email protected]> wrote: Dear all, These two and many other "tips" need to be collected and told to TLUD stove users. One avenue is in Christa's Manual, Another is in stove manuals and at training sessions. And at websites, etc. 1. Charcoal to extinguish hot charcoal: When dealing with small amounts of hot charcoal as in the residential TLUD stoves, one easy way to extinguish hot charcoal is to dump it into a somewhat larger amount of already extinguished (cold) char. The cold char takes up much of the heat, extinguishing the hot char. Be sure that it is well mixed and sufficiently cooled to avoid re-ignition. This is best done in containers that can be sealed. Containers of metal or ceramic are best, but even wood could be used if the quantity of cold char is sufficient to prevent the hot char from reaching the sides. As always, be careful because oxygen to a small hot ember can lead to much greater combustion. 2. "Space fillers" in loose fuels in TLUD devices: General note about fuel in TLUDs: In general, dry biomass fuels in TLUDs need to appropriately fill most of the air-space in the fuel chamber. This is accomplished with smallish pieces such as wood chips, pellets, short-cut twigs, and shells of seeds. Also, careful packing with vertical wood-segments or straight-ish reeds can occupy the space. But twisted sticks and long-ish pieces that bridge inside the fuel chamber leave too much space unoccupied. In those cases, the space can be appropriately occupied by adding small pieces, as named above. Shake the TLUD to assure that the pieces have settled in well, and add more as needed. These fillers will also pyrolyze and become charcoal. Inert materials as "space fillers": Technically, the space fillers could be inert materials such as ball bearings or pebbles (of rock that will not shatter with this heat) or fired clay balls. Although they could function effectively, they would require separation after the batch is unloaded and cooled. But there is one material that solves these inconveniences and costs. It is charcoal. Charcoal as a space filler: TLUD stoves make charcoal. Therefore, charcoal is not a fuel for TLUD stoves. However, small pieces of charcoal (but not charcoal fines) can also be used as "space fillers" to solve the need to restrict air flow in the fuel chamber. The char will not pyrolyze and will not burn (char-gasify or oxidize) as the pyrolysis front moves downward through that biomass fuel. a. Char is abundant for TLUD users, and at no additional cost, and is not consumed. b. Unlike small pieces of biomass as fillers, char pieces cannot catch on fire and then fall down to the lower areas of the fuel chamber and igniting fire there. Charcoal as a reducer of thermal output: Clearly in the above statements when charcoal is used as a space filler, the fuel chamber contains less biomass and therefore less heat will be generated (which is desirable for simmering and some other cooking needs). Another variation is to have well packed (mainly straight) wood or reeds or stems as a vertical bundle in the middle of a TLUD fuel chamber. Then load in small charcoal all around the bundle to fill in the remaining space. When used (pyrolyzed), the fuel will yield heat in proportion to its cross-sectional area of the fuel bundle, not of the entire cross-sectional area of the fuel cylinder. This is because the annulus of char is essentially non-combustible at the pyrolytic temperatures in the TLUD reactor. Variations of all of the above need to be tested and even measured. (This will be utilized at the Stove Camp at Aprovecho 22 - 26 July 2013). Note: Credit for much of the above goes to Dr. Jack Bacon, a senior scientist at the NASA Johnson Space Center in Houston, TX. Jack, a leader in the local chapter of Engineers Without Borders (EWB-JSC), suggested charcoal as fillers during discussions in April 2013 with Paul Anderson about an EWB project to use TLUDs for heat in a fruit dryer in Rwanda. Dr TLUD -- Paul S. Anderson, PhD aka "Dr TLUD" Email: [email protected] <mailto:psanders%40ilstu.edu> Skype: paultlud Phone: +1-309-452-7072 Website: www.drtlud.com __._,_.___ <http://groups.yahoo.com/group/biochar/post;_ylc=X3oDMTJyY2p1OTVhBF9TAzk3MzU5NzE0BGdycElkAzIyNDM4MDUyBGdycHNwSWQDMTcwNzQxODYxMgRtc2dJZAMxNDk2MARzZWMDZnRyBHNsawNycGx5BHN0aW1lAzEzNjcxODAzNjM-?act=reply&messageNum=14960> Reply via web post <mailto:[email protected]?subject=RE%3A%20%5BStoves%5D%20%5Bbiochar%5D%20TLUD%20advances%20--%20Two%20more%20uses%20of%20char> Reply to sender <mailto:[email protected]?subject=RE%3A%20%5BStoves%5D%20%5Bbiochar%5D%20TLUD%20advances%20--%20Two%20more%20uses%20of%20char> Reply to group <http://groups.yahoo.com/group/biochar/post;_ylc=X3oDMTJmNG5nZ2doBF9TAzk3MzU5NzE0BGdycElkAzIyNDM4MDUyBGdycHNwSWQDMTcwNzQxODYxMgRzZWMDZnRyBHNsawNudHBjBHN0aW1lAzEzNjcxODAzNjM-> Start a New Topic <http://groups.yahoo.com/group/biochar/message/14958;_ylc=X3oDMTM3NXRhZnJjBF9TAzk3MzU5NzE0BGdycElkAzIyNDM4MDUyBGdycHNwSWQDMTcwNzQxODYxMgRtc2dJZAMxNDk2MARzZWMDZnRyBHNsawN2dHBjBHN0aW1lAzEzNjcxODAzNjMEdHBjSWQDMTQ5NTg-> Messages in this topic (3) Recent Activity: · <http://groups.yahoo.com/group/biochar/members;_ylc=X3oDMTJnZW9ocGI2BF9TAzk3MzU5NzE0BGdycElkAzIyNDM4MDUyBGdycHNwSWQDMTcwNzQxODYxMgRzZWMDdnRsBHNsawN2bWJycwRzdGltZQMxMzY3MTgwMzYz?o=6> New Members 4 <http://groups.yahoo.com/group/biochar;_ylc=X3oDMTJmNTh1bDg3BF9TAzk3MzU5NzE0BGdycElkAzIyNDM4MDUyBGdycHNwSWQDMTcwNzQxODYxMgRzZWMDdnRsBHNsawN2Z2hwBHN0aW1lAzEzNjcxODAzNjM-> Visit Your Group MARKETPLACE <http://csc.beap.bc.yahoo.com/yi?bv=1.0.0&bs=(132pbgdk0(gid$eaf0c0ca-b040-11e2-b561-27877508b14b,st$1367180364058107,si$4452551,sp$1707418612,pv$1,v$2.0))&t=J_3-D_3&al=(as$121iu951u,aid$XKwLBGKL4JQ-,cr$-1,ct$25,at$H,eob$-1)> _____ <http://csc.beap.bc.yahoo.com/yi?bv=1.0.0&bs=(132pbgdk0(gid$eaf0c0ca-b040-11e2-b561-27877508b14b,st$1367180364058107,si$4452551,sp$1707418612,pv$1,v$2.0))&t=J_3-D_3&al=(as$121i5lamc,aid$Z_MLBGKL4JQ-,cr$-1,ct$25,at$H,eob$-1)> _____ <http://csc.beap.bc.yahoo.com/yi?bv=1.0.0&bs=(132pbgdk0(gid$eaf0c0ca-b040-11e2-b561-27877508b14b,st$1367180364058107,si$4452551,sp$1707418612,pv$1,v$2.0))&t=J_3-D_3&al=(as$121ie2vrc,aid$cjoMBGKL4JQ-,cr$-1,ct$25,at$H,eob$-1)> <http://groups.yahoo.com/;_ylc=X3oDMTJlZTR0NnU3BF9TAzk3NDc2NTkwBGdycElkAzIyNDM4MDUyBGdycHNwSWQDMTcwNzQxODYxMgRzZWMDZnRyBHNsawNnZnAEc3RpbWUDMTM2NzE4MDM2Mw--> Yahoo! Groups Switch to: <mailto:[email protected]?subject=Change%20Delivery%20Format:%20Traditional> Text-Only, <mailto:[email protected]?subject=Email%20Delivery:%20Digest> Daily Digest • <mailto:[email protected]?subject=Unsubscribe> Unsubscribe • <http://docs.yahoo.com/info/terms/> Terms of Use • <mailto:[email protected]?subject=Feedback%20on%20the%20redesigned%20individual%20mail%20v1> Send us Feedback . <http://geo.yahoo.com/serv?s=97359714/grpId=22438052/grpspId=1707418612/msgId=14960/stime=1367180363/nc1=1/nc2=2/nc3=3> __,_._,___
_______________________________________________ Stoves mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org for more Biomass Cooking Stoves, News and Information see our web site: http://stoves.bioenergylists.org/
