Martin,

Concerning "space fillers", I and probably others have put wood chips and small pieces into TLUDs where there is otherwise too much space between the main biomass fuel pieces. Yes, the chips do pyrolyze.

But my point is that making small pieces of biomass for filler can be difficult. But using char pieces from previous TLUD batches is very easy. But just do not expect to get much energy from the charcoal filler, because it has already been pyrolyzed.

Concerning your comment/question about measuring the flow of primary air, it is not sufficient to measure characteristics of the fan/blower/pump because the holes in the bottom of the TLUD are intentionally small and the fuel is intended to (expected to) block some of the flow. What is needed is to measure the flow INSIDE the fuel cylinder, such as in the bottom 2 cm of fuel. But how to do that?

Paul

Paul S. Anderson, PhD  aka "Dr TLUD"
Email:  [email protected]   Skype: paultlud  Phone: +1-309-452-7072
Website:  www.drtlud.com

On 5/6/2013 3:56 PM, Boll, Martin Dr. wrote:
TLUD-ers turn it as you want;
Charcoal as space-filler means  __somehow__  that "mixed fuel" is used in a TLUD.  From 
that aspect it is a "hybrid-fuelled" TLUD.
Change the ratio of the "hybrid-fuelled" TLUD  to:  wood-pieces as space-filler 
(by charcoal-packing). Run this different mixture and look.
Who did this already? Interesting to hear about.
- It would be as well interesting to know the difference in performance between 
test-runs with natural draft and with forced air.

Even by that different ratio, the burn can be stopped after outgassing, to get 
as final result charcoal.

- Hybrid-fuelled TLUDs would get probably a better quality of resulting 
charcoal  ( Frank, mentioned that as important difference for bio-char)

P.S. We could stop guessing about the amount of more or less _primary air_ 
(caused by the minimal pressure of a fan or natural draft in different-dense 
TLUD-packages), and make an exact air-dosage by a rotameter, or less expansive 
and simpler by an aquarium-air-pump.

Martin









_______________________________________________
Stoves mailing list

to Send a Message to the list, use the email address
[email protected]

to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org

for more Biomass Cooking Stoves,  News and Information see our web site:
http://stoves.bioenergylists.org/



_______________________________________________
Stoves mailing list

to Send a Message to the list, use the email address
[email protected]

to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org

for more Biomass Cooking Stoves,  News and Information see our web site:
http://stoves.bioenergylists.org/

Reply via email to