On Sun, Jun 01, 2014 at 02:54:47PM +0200, Henrik Brautaset Aronsen wrote: > Martin Gysel wrote: > >>Only used gas in the plan is the EAN27. > >> > >>Subsurface dive plan > >>based on GFlow = 30 and GFhigh = 85 > >> > >>Transition to 40 m in 2:00 min - runtime 2:00 on EAN27 > >>Stay at 40 m for 25:00 min - runtime 27:00 on EAN27 > >>Switch gas to (24/24) > >>Transition to 37 m in 0:23 min - runtime 27:23 on (24/24) > > > >it seems transition times are calculated by distance and speed, which > >obviously is correct from a math point of view but for a diver, all > >times should be rounded to at least half minutes. personally I even tend > >to say lets round to minutes. > >when diving deco on plan, the best thing is to have all stops in memory > >(as a backup, or on a slate as a backup). but it gets really hard to > >remember seconds or half minutes. > > Agreed, it really makes sense to force these values to be in whole minutes. > At least that's what GUE Deco Planner and Multideco/VPlanner does.
OK, that's easy. > >it would also be nice if the planner output is in table form which > >allows printing to take to depth > > +1 That was my thinking as well when I looked at it. I'll look into that. Unless one of you wants to play with it? /D _______________________________________________ subsurface mailing list [email protected] http://lists.hohndel.org/cgi-bin/mailman/listinfo/subsurface
