Hello, I think there must be a simpler way of re-routing using the attribute *line* of <stop> tag. As per definition, we can set a new line attribute on the vehicles at this particular stop, it will be triggered automatically. Also, I observe that there is a *tripId* attribute for <stop> tag. Can it be used to count or record various trips of a particular vehicle? thanks and regards, Dillip Rout
On Tue, 16 Jun 2020 at 14:52, Jakob Erdmann <namdre.s...@gmail.com> wrote: > The problem is with the rerouter that reassigns a new non-repeating route > and thereby loses all the repeated stops. If you remove the rerouter, the > vehicle will stop in each lap. > > Am Di., 16. Juni 2020 um 10:27 Uhr schrieb Chris Weinhaupl < > chrisweinha...@gmail.com>: > >> >> Thanks for the 'repeat' tip, the vehicles are still not stopping on the >> second lap. >> >> This is my version of sumo: sumo-win64-1.6.0 >> >> <route id="r_north_to_city" edges="north gneE0 city gneE1" repeat= >> "10"> >> <stop busStop="busStop_north_0_1" duration="10"/> >> <stop busStop="busStop_city_0_0" duration="10"/> >> </route> >> >> <flow id="ns" route="r_north_to_city" begin="10" end="1000" period= >> "200" type="12passenger"/> >> >> >> On Mon, Jun 15, 2020 at 2:06 AM Jakob Erdmann <namdre.s...@gmail.com> >> wrote: >> >>> @Dillip Rout: Please take a look at >>> https://github.com/eclipse/sumo/tree/master/tests/sumo/basic/routes/parsing/repeat_flow_busstop >>> @Chris Weinhaupl: You need to add the 'repeat' attribute in your route >>> definition to define additional laps >>> >>> Am Mo., 15. Juni 2020 um 08:30 Uhr schrieb Tripplanner Mumbai < >>> tripplanner...@gmail.com>: >>> >>>> Hello Jakob, >>>> I tried something similar to your example: >>>> <route id="r0" edges="SC CN NC CS" repeat="2" period="100"> >>>> <stop lane="SC_0" endPos="50" until="20"/> >>>> <stop lane="CN_0" endPos="50" until="65"/> >>>> </route> >>>> <flow id="0" route="r0" begin="10" end="211" period="200"/> >>>> >>>> It is observed that vehicles assigned to such a line (public transit >>>> route) are indeed taking multiple trips as per the definition and the >>>> relative time values are maintained. Each of these assigned vehicles always >>>> run from start to end terminal, in this example, stop lane="SC_0" is always >>>> the start and one direction. However, none of the assigned vehicles are >>>> restarting from the end terminal to the start terminal, in this example, >>>> stop lane="CN_0" is never a start. >>>> >>>> All I am trying to point out is that an assigned vehicle of a line >>>> starts at one terminal and goes to the other terminal (upstream journey). >>>> Then, the vehicle starts from the other terminal and comes back to start >>>> (downstream journey). Nevertheless, the simulation in SUMO always logs only >>>> the upstream journey although the vehicle is actually making the downstream >>>> journey as well. >>>> >>>> I extended your example (bold) to force the vehicle of the line to halt >>>> at downstream journey too: >>>> <route id="r0" edges="SC CN NC CS" repeat="2" period="100"> >>>> <stop lane="SC_0" endPos="50" until="20"/> >>>> <stop lane="CN_0" endPos="50" until="65" *duration="120"*/> >>>> *<stop lane="CN_0" endPos="50" until="205"/>* >>>> </route> >>>> <flow id="0" route="r0" begin="10" end="211" period="200"/> >>>> However, it did not produce the desired result. >>>> >>>> I request you to suggest something by which both upstream and >>>> downstream journey of each vehicle of the route will be captured. >>>> >>>> thanks and regards, >>>> Dillip Rout >>>> >>>> On Mon, 15 Jun 2020 at 04:03, Chris Weinhaupl <chrisweinha...@gmail.com> >>>> wrote: >>>> >>>>> >>>>> This creates 4 vehicles that will lap the route. >>>>> The bus will stop at the first stop, however on the second lap the >>>>> vehicle will not stop at the busStop. >>>>> >>>>> Thanks for the assistance, what may I change make the same vehicle >>>>> repeat and stop at the first stop on the second/third/forth lap etc? >>>>> >>>>> <route id="r_north_to_city" edges="north gneE0 city gneE1"> >>>>> <stop busStop="busStop_north_0_1" duration="10"/> >>>>> <stop busStop="busStop_city_0_0" duration="10"/> >>>>> </route> >>>>> >>>>> <flow id="ns" route="r_north_to_city" begin="10" end="1000" period >>>>> ="200" type="12passenger"/> >>>>> >>>>> On Fri, Jun 12, 2020 at 12:30 AM Jakob Erdmann <namdre.s...@gmail.com> >>>>> wrote: >>>>> >>>>>> The following example (from >>>>>> https://github.com/eclipse/sumo/tree/master/tests/sumo/basic/routes/parsing/repeat_flow_stops >>>>>> ) defines >>>>>> 2 buses that run a looped route 3 times each (initial run and 2 >>>>>> repeats). The 'until' times are relative to the flow vehicle departures >>>>>> (at >>>>>> time 0 and 200) and the period parameter defines by how much the until >>>>>> times are shifted on each repeat. >>>>>> Taken together there are 12 vehicle stops in this simulation (2 stops >>>>>> per route x 3 repeats x 2 buses). >>>>>> >>>>>> <route id="r0" edges="SC CN NC CS" repeat="2" period="100"> >>>>>> <stop lane="SC_0" endPos="50" until="20"/> >>>>>> <stop lane="CN_0" endPos="50" until="65"/> >>>>>> </route> >>>>>> <flow id="0" route="r0" begin="10" end="211" period="200"/> >>>>>> >>>>>> Am Fr., 12. Juni 2020 um 06:27 Uhr schrieb Tripplanner Mumbai < >>>>>> tripplanner...@gmail.com>: >>>>>> >>>>>>> Hello, >>>>>>> As per the documentation ( >>>>>>> https://sumo.dlr.de/docs/Definition_of_Vehicles,_Vehicle_Types,_and_Routes.html#repeated_routes), >>>>>>> repeat is similar to frequency, am I correct?. >>>>>>> Or, the frequency is similar to vehsPerHour defined in flow ( >>>>>>> https://sumo.dlr.de/docs/Definition_of_Vehicles,_Vehicle_Types,_and_Routes.html#repeated_vehicles_flows >>>>>>> ) >>>>>>> For any public transit route or line, the fleet size is fixed, those >>>>>>> vehicles make to and fro motion through the designated stops in various >>>>>>> trips. >>>>>>> Please let me know, >>>>>>> thank you, >>>>>>> Dillip Rout >>>>>>> >>>>>>> On Fri, 12 Jun 2020 at 08:33, Tripplanner Mumbai < >>>>>>> tripplanner...@gmail.com> wrote: >>>>>>> >>>>>>>> Hello, >>>>>>>> I have the same issue, that is, tried to simulate bus service. For >>>>>>>> a line (or public transit route), several vehicles (fleet) repeatedly >>>>>>>> make >>>>>>>> many trips according to headway (period in SUMO) or frequency. As per >>>>>>>> the >>>>>>>> suggestions @Jackob, I tried the following. >>>>>>>> >>>>>>>> <route id="14" edges="78[0] 56a 56b 77bc 77cd 53cd 53[0] 78[1][1] >>>>>>>> 189[0] 189[1][0]+20000 189[1][1] 188 87[0] 20001+87[1][0] 87[1][1] m90 >>>>>>>> 89[0] 20002+89[1][0] 89[1][1] 91 186 109[0] 109[1][0]+20003 109[1][1] >>>>>>>> 116 >>>>>>>> 46 134 134b 133 31 115 110 185 92 90 m91 88 187 190 77[0] 53[1][0] >>>>>>>> 53[1][1][0] 77[1][0] 77ab 77bc 77cd 53cd 53[0] 78[1][1] 189[0] >>>>>>>> 189[1][0]+20000"> >>>>>>>> <stop busStop="busStop#31" until="0"/> >>>>>>>> <stop busStop="busStop#32" until="120"/> >>>>>>>> <stop busStop="busStop#33" until="240"/> >>>>>>>> <stop busStop="busStop#34" until="360"/> >>>>>>>> <!--stop busStop="busStop#21" until="480" duration="600"/--> >>>>>>>> <stop busStop="busStop#21" until="480"/> >>>>>>>> <stop busStop="busStop#22" unitl="1080"/> >>>>>>>> <stop busStop="busStop#9" unitl="1200"/> >>>>>>>> <stop busStop="busStop#6" unitl="1320"/> >>>>>>>> <stop busStop="busStop#3" unitl="1440"/> >>>>>>>> <stop busStop="busStop#2" unitl="1560"/> >>>>>>>> <!--stop busStop="busStop#31" unitl="1680" >>>>>>>> duration="600"/--> >>>>>>>> <stop busStop="busStop#31" unitl="1680" duration="600"/> >>>>>>>> >>>>>>>> </route> >>>>>>>> <flow id="bus_14" begin="0" end="3600" period="240" >>>>>>>> departLane="best" line="14" type="bus" route="14"/> >>>>>>>> >>>>>>>> However, it resulted in (i) infinite loop, simulated did not end >>>>>>>> (ii) no lines or vehicles are repeated as per the output files. >>>>>>>> I am also waiting to see a solution to it. >>>>>>>> >>>>>>>> thanks and regards, >>>>>>>> Dillip Rout >>>>>>>> >>>>>>>> On Fri, 12 Jun 2020 at 07:07, Chris Weinhaupl < >>>>>>>> chrisweinha...@gmail.com> wrote: >>>>>>>> >>>>>>>>> Thanks @namdre >>>>>>>>> >>>>>>>>> I would like 70 buses to repeat a 40km loop stopping at defined >>>>>>>>> busstops along the way. >>>>>>>>> I tried re-router but I cant make the bus stop the second time >>>>>>>>> around. >>>>>>>>> >>>>>>>>> I tried to figure out a config that matches your suggestion.(just >>>>>>>>> below). >>>>>>>>> >>>>>>>>> May I ask for a sample config of a repeating transit bus. >>>>>>>>> >>>>>>>>> >>>>>>>>> Thanks everyone. >>>>>>>>> Cheers >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Notes from Github: >>>>>>>>> I'm not sure what your question is. >>>>>>>>> >>>>>>>>> - if you want to keep the same vehicle circulation (vehicle id >>>>>>>>> stays the same) then you can either >>>>>>>>> - define a vehicle or trip with lots of repeating stops >>>>>>>>> - define a route that loops back to the start once and uses >>>>>>>>> attribute 'repeat'. then assign that route to a vehicle >>>>>>>>> - if you want to keep sending a new vehicle on the same route >>>>>>>>> repeatedly you can use a flow. >>>>>>>>> >>>>>>>>> Of course, both things can be combined if you want multiple >>>>>>>>> vehicles running the same repeating loop. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Ref: >>>>>>>>> https://github.com/eclipse/sumo/issues/7127 >>>>>>>>> >>>>>>>>> @namdre >>>>>>>>> >>>>>>>>> For clarification regarding repeating PT. >>>>>>>>> I am wanting to have the same type vehicle repeat its route. >>>>>>>>> >>>>>>>>> I tried repeating edges and stops in router and flow. >>>>>>>>> I think I misunderstood your comments regarding this question: >>>>>>>>> https://github.com/eclipse/sumo/issues/6550 >>>>>>>>> >>>>>>>>> ``` >>>>>>>>> <flow id="f1" color="1,1,0" begin="0" end= "3600" period="30" >>>>>>>>> type="12passenger"> >>>>>>>>> <route edges="north gneE0 city gneE1 north gneE0 city >>>>>>>>> gneE1 north gneE0 city gneE1 north gneE0 city gneE1"/> >>>>>>>>> <stop busStop="busStop_north_0_1" duration="10"/> >>>>>>>>> <stop busStop="busStop_city_0_0" duration="10"/> >>>>>>>>> <stop busStop="busStop_north_0_1" duration="10"/> >>>>>>>>> <stop busStop="busStop_city_0_0" duration="10"/> >>>>>>>>> <stop busStop="busStop_north_0_1" duration="10"/> >>>>>>>>> <stop busStop="busStop_city_0_0" duration="10"/> >>>>>>>>> <stop busStop="busStop_north_0_1" duration="10"/> >>>>>>>>> <stop busStop="busStop_city_0_0" duration="10"/> >>>>>>>>> </flow> >>>>>>>>> ``` >>>>>>>>> >>>>>>>>> ``` >>>>>>>>> <route id="r_north_to_city" edges="north gneE0 city gneE1 >>>>>>>>> north gneE0 city gneE1 north gneE0 city gneE1 north gneE0 city gneE1"> >>>>>>>>> <stop busStop="busStop_north_0_1" duration="10"/> >>>>>>>>> <stop busStop="busStop_city_0_0" duration="10"/> >>>>>>>>> <stop busStop="busStop_north_0_1" duration="10"/> >>>>>>>>> <stop busStop="busStop_city_0_0" duration="10"/> >>>>>>>>> <stop busStop="busStop_north_0_1" duration="10"/> >>>>>>>>> <stop busStop="busStop_city_0_0" duration="10"/> >>>>>>>>> </route> >>>>>>>>> ``` >>>>>>>>> _______________________________________________ >>>>>>>>> sumo-user mailing list >>>>>>>>> sumo-user@eclipse.org >>>>>>>>> To unsubscribe from this list, visit >>>>>>>>> https://www.eclipse.org/mailman/listinfo/sumo-user >>>>>>>>> >>>>>>>> _______________________________________________ >>>>>>> sumo-user mailing list >>>>>>> sumo-user@eclipse.org >>>>>>> To unsubscribe from this list, visit >>>>>>> https://www.eclipse.org/mailman/listinfo/sumo-user >>>>>>> >>>>>> _______________________________________________ >>>>>> sumo-user mailing list >>>>>> sumo-user@eclipse.org >>>>>> To unsubscribe from this list, visit >>>>>> https://www.eclipse.org/mailman/listinfo/sumo-user >>>>>> >>>>> _______________________________________________ >>>>> sumo-user mailing list >>>>> sumo-user@eclipse.org >>>>> To unsubscribe from this list, visit >>>>> https://www.eclipse.org/mailman/listinfo/sumo-user >>>>> >>>> _______________________________________________ >>>> sumo-user mailing list >>>> sumo-user@eclipse.org >>>> To unsubscribe from this list, visit >>>> https://www.eclipse.org/mailman/listinfo/sumo-user >>>> >>> _______________________________________________ >>> sumo-user mailing list >>> sumo-user@eclipse.org >>> To unsubscribe from this list, visit >>> https://www.eclipse.org/mailman/listinfo/sumo-user >>> >> _______________________________________________ >> sumo-user mailing list >> sumo-user@eclipse.org >> To unsubscribe from this list, visit >> https://www.eclipse.org/mailman/listinfo/sumo-user >> > _______________________________________________ > sumo-user mailing list > sumo-user@eclipse.org > To unsubscribe from this list, visit > https://www.eclipse.org/mailman/listinfo/sumo-user >
_______________________________________________ sumo-user mailing list sumo-user@eclipse.org To unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user
