Dear all,
I observed some unexpected behavior at stops:
1. persons can enter or leave vehicles at stops, even though the vehicle
is not at the lane where the stop is attached to, but also on lanes with
a higher lane index (means they jump from the platform across lanes into
the vehicle).
2. I noticed that persons jump into vehicles even before they reached
their edge-position according to the plan. The only condition to board
seems to be that a vehicles stops in the defined position-range and a
person just happens to be in this range when the vehicle stops. This
seems to occur in more recent SUMO versions.
Unfortunately with such a behavior I cannot selectively pick up persons
with vehicles at dedicated positions, or just park vehicles at certain
positions.
I've been complaining about this behavior some time ago. I found a
workaround, but especially the second behavior makes it impossible to do
what I intend. For my purpose access lists do not help, and changing
vehicle capacity dynamically through TraCi is not possible.
So maybe someone of you did find a way to handle this type of problem.
Otherwise I'd ask if it were a big issue to change code, there may be
some really simple ways of fixing:
- board only if vehicle is on the lane of the stop
- allow change vehicle capacity through TraCi (one could lock the
vehicle by setting capacity to 0 or to the number of persons already in
the vehicle, but that would not prevent persons jumping off the vehicle
whenever it stops)
- adding a Lock attribute to the vehicle, this would be the best
solution and also closest to reality.
Thanks as always for any ideas on this matter.
Best wishes,
Joerg
_______________________________________________
sumo-user mailing list
[email protected]
To unsubscribe from this list, visit
https://www.eclipse.org/mailman/listinfo/sumo-user
