Thank you very much. It's helped me a lot 2017-02-08 22:39 GMT+07:00 Jakob Erdmann <[email protected]>:
> yes. (don't forget the quotes) > vTypes="bus" > > 2017-02-08 9:09 GMT+01:00 Jirayu Tippayagulpairod <[email protected]>: > >> Oh thank you very much, It means that you use this for example >> <edgeData id="<MEASUREMENT_ID>" file="<OUTPUT_FILE>" vTypes = bus/> >> and import this as additional file before simulation , am i right ? >> >> Best regards, >> Bank >> >> 2017-02-07 14:08 GMT+07:00 Jakob Erdmann <[email protected]>: >> >>> Yes, the metrics you require will be available separately for each of >>> the types you select (see http://sumo.dlr.de/wiki/Simula >>> tion/Output/Lane-_or_Edge-based_Traffic_Measures#Value_Descriptions). >>> By setting a different value for the output 'file' attribute for each type, >>> it is easy to process them separately as well. >>> regards, >>> Jakob >>> >>> 2017-02-06 9:10 GMT+01:00 Jirayu Tippayagulpairod <[email protected] >>> >: >>> >>>> Thank you for your suggestion. But i still have some confused that if i >>>> generate the output via edge data , Could I export the output that I >>>> mentioned before (edge performance e.g. density and traveltime ) I >>>> apologize for any misunderstanding .I am some beginner in SUMO >>>> >>>> Best regards, >>>> >>>> Jirayu >>>> >>>> 2017-02-06 13:49 GMT+07:00 Jakob Erdmann <[email protected]>: >>>> >>>>> When using simulated induction loops (http://sumo.dlr.de/wiki/Simul >>>>> ation/Output/Induction_Loops_Detectors_(E1)) you can set the >>>>> attribute splitByType="true" to get type-specific output. >>>>> >>>>> When using edgeData (http://sumo.dlr.de/wiki/Simul >>>>> ation/Output/Lane-_or_Edge-based_Traffic_Measures) you can filter for >>>>> type by setting the vTypes attribute (i.e. vTypes="bus"). You will then >>>>> need a separate <edgeData>-definitions for each type (or list of types) >>>>> you >>>>> are interested in. >>>>> >>>>> regards, >>>>> Jakob >>>>> >>>>> 2017-02-03 2:33 GMT+01:00 Jirayu Tippayagulpairod < >>>>> [email protected]>: >>>>> >>>>>> Dear user and developers , >>>>>> I'm student in Thailand who do the project with SUMO >>>>>> program and I have some question to ask. As I used SUMO , it can >>>>>> simulate >>>>>> the many type of vehicle in traffic and the >>>>>> output is in form of enter , left ,density , travel time but it >>>>>> doesn't >>>>>> show each type of output (For example : I mean that 4 outputs for car >>>>>> and 4 >>>>>> outputs for bus individually) Therefore, I want to know that Can SUMO >>>>>> simulate the outputs individually for each type of vehicles or it >>>>>> cannot ? >>>>>> >>>>>> Best regards, >>>>>> >>>>>> Jirayu Tippayagulpairod >>>>>> ------------------------------------------------------------ >>>>>> ------------------ >>>>>> Check out the vibrant tech community on one of the world's most >>>>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >>>>>> _______________________________________________ >>>>>> sumo-user mailing list >>>>>> [email protected] >>>>>> https://lists.sourceforge.net/lists/listinfo/sumo-user >>>>>> >>>>> >>>>> >>>> >>> >> > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ sumo-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sumo-user
