>Date: Wed, 22 Jul 1998 22:27:52 -0400
>To: [EMAIL PROTECTED]
>From: Jack Aubert <[EMAIL PROTECTED]>
>Subject: Re: transfer of lines
>In-Reply-To: <[EMAIL PROTECTED]>
>
>At 09:55 AM 7/22/98 -0700, you wrote:
>>using a router. Either way it seems like a big task. How have others
>>transfered paper line drawings to the finished dial? Thanks.
>
>I transferred paper line drawings to a peice of slate, which I then carved
in using a piece of hard steel and repeteated scoring using a straight edge.
>This is the way I transferred the lines: I took the paper page and taped
it to the slate. I made a small hole with an awl to mark the central
origin. I extended all lines to the edge of the paper and marked them on
the slate. I then removed the paper and traced the lines back to the
center mark.
>
>Jack Aubert
