Thierry: The issue sounds like it is DHCP/Java related. Have you changed
/usr/java or /usr/j2se? Have you verified DHCP and the DHCP tools still
work? 

Hajime: FYI, On Solaris 10 systems you should check /etc/inet/ipnodes
first and then check /etc/inet/hosts (ipnodes is read first). You should
also keep the IPv4 entries sync'd between the two files. [ The
/etc/inet/ipnodes file has actually existed since Solaris 8 but the
installer never put any entries in it so unless you were doing IPv6 you
could ignore it. However, the Solaris 10 installer actually populates it
so you now how to pay attention to it. ]


Some interesting trivia: Solaris 7 Hardware Release 5 contained new
versions of the DHCP tools that required a new version of Java to work.
Now, since Maintenance Updates only contain the patches apply MU5
applied the DHCP patches but did *not* include the new Java version they
needed to work, effectively breaking DHCP. Not very good for a Sun Ray
server.... ;-)


-- Russ

> -----Original Message-----
> From: [EMAIL PROTECTED] 
> [mailto:[EMAIL PROTECTED] On Behalf Of hajime suzuci
>    You can check some files as following:
> 
>       /etc/inet/hosts
>       /etc/inet/netmasks
>       /etc/inet/networks
> 
>    If any "SunRay" entry is in those files, ifconfig works 
> automatically.
>    Or ... DHCP configuration ?
> 
> Regards,
> Hajime Suzuci,
> 
> 
> Thierry Delaitre wrote:
> > i tried to remove the interface of the sunray interconnect 
> and put it 
> > back and there are some interesting results:
> > 
> > bash-3.00# /opt/SUNWut/sbin/utadm -d ce1 ### Removing Sun Ray 
> > information for interface "ce1"
> > Configuration for DHCP interface ce1 does not exist.
> > ### Removing Sun Ray interface configuration for "ce1"
> > LAN connections are on to allow Sun Ray connections from shared 
> > networks Do you want to turn off LAN connections?  ([Y]/N): n 
> > bash-3.00# ifconfig -a
> > lo0: 
> flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 
> > 8232 index 1
> >         inet 127.0.0.1 netmask ff000000
> > ce0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 
> 1500 index 2
> >         inet 161.74.91.26 netmask ffff0000 broadcast 161.74.255.255
> >         ether 0:3:ba:9b:47:dd
> > ce0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> 
> mtu 1500 index 2
> >         inet 192.168.252.1 netmask ffffff00 broadcast 
> 192.168.252.255 
> > bash-3.00# /opt/SUNWut/sbin/utadm -a ce1 ### Configuring 
> > /etc/nsswitch.conf ### Configuring Service information for Sun Ray
> > Error:  unable to add vendor options to dhcp:
> >     Error:  cannot add SunRay symbols to dhcptab:
> >           Could not create the Java virtual machine.
> > Error:  cannot add server macro "SunRay" to dhcptab:
> >     Could not create the Java virtual machine.
> > 
> > The only thing i did was to apply the latest recommended 
> patches for 
> > Solaris 10!
> > 
> > BTW, is 3.1 being released soon ?
> > 
> > Thierry.
> > 
> > On Sat, 27 Aug 2005, Thierry Delaitre wrote:
> > 
> > 
> >>I've got 2 sunray servers configured as a group. I'm sure i had 
> >>configured them as a group. however, the secondary server is now 
> >>telling me that the sunray interconnect framework (ce1) is not 
> >>configured ! is this a bug ? Is that because i've ran utadm 
> -L on after or defined an ip alias on ce0 ?
> >>
> >>Thierry.
> >>
> >>bash-3.00# /opt/SUNWut/sbin/utadm -a ce1
> >>Error: Interface "ce1" already configured; cannot add
> >>
> >>bash-3.00# /opt/SUNWut/sbin/utadm -l
> >>LAN connections: On
> >>Sun Ray interconnect framework is not configured
> >>
> >>bash-3.00# ifconfig -a
> >>lo0: 
> flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 
> >>8232 index 1
> >>        inet 127.0.0.1 netmask ff000000
> >>ce0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 
> 1500 index 2
> >>        inet 161.74.91.26 netmask ffff0000 broadcast 161.74.255.255
> >>        ether 0:3:ba:9b:47:dd
> >>ce0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> 
> mtu 1500 index 2
> >>        inet 192.168.252.1 netmask ffffff00 broadcast 
> 192.168.252.255
> >>ce1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 
> 1500 index 4
> >>        inet 192.168.129.2 netmask ffffff00 broadcast 
> 192.168.129.255
> >>        ether 0:3:ba:9b:47:dd
> > 
> > _______________________________________________
> > SunRay-Users mailing list
> > [email protected]
> > http://www.filibeto.org/mailman/listinfo/sunray-users
> _______________________________________________
> SunRay-Users mailing list
> [email protected]
> http://www.filibeto.org/mailman/listinfo/sunray-users
> 
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users

Reply via email to