> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:sunray-users- > [EMAIL PROTECTED] On Behalf Of Greg Trasuk > Sent: Tuesday, September 05, 2006 1:13 AM > To: [email protected] > Subject: Re: [SunRay-Users] Trouble with some 2nd hand SunRay 1s > \ > > The good news: the firmware will automatically be upgraded when the > SR1 > is connected to a current version of SRSS. The bad news: The older > firmware only works on the dedicated interconnect. So what you have to > do is setup a second ethernet port as a dedicated interconnect and plug > the Sun Ray into it (personally I used an Ethernet crossover cable, but > if you have a spare hub around that would probably work too
I don't think setting up a dedicated interconnect is really necessary. I have upgraded several 1.x versions of DTU firmware by simply plugging the DTU into the same network segment as the server. The DTU unit shouldn't be able to tell the difference between a dedicated interconnect and a shared interconnect as long as you are on the same segment and not using any additional port settings on the switch such as VLAN tagging. _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
