Hi all,
I need a help, because I am little bit frustrated... :(
I have installed SuSE Enterprise Server 10 and SRSS 3.1 few days ago.
Everything looks great, system works perfectely and Sun Ray Admin
commads works great. I know, that SRSS is supported only on SLES 9.3
with SP3, but I was hoping that it will work also on the newer version
of SLES... :(
For example, after calling command "utgstatus: the result looks lite this:
linux:/opt/SUNWut/sbin # ./utgstatus
hostflags interface flags
192.168.0.0/16
-------- -----------------------
linux TN 192.168.0.1 UA-
Also "utcapture" works ok:
linux:/opt/SUNWut/sbin # ./utcapture
# TERMINALID TIMESTAMP TOTAL PACKET TOTAL LOSS BYTES SENT
PERCENT LOSS LATENCY
No desktops found
No desktops found
No desktops found
...
BUT! When I connect the first DTU into the network it all hangs out with
command "poll timed out" and the DTU hangs out with the code 26D. Does
anyone know what is the problem?? Please help, I just don't want to
downgrade to the SLES 9.3 :(
Here are some helpful informations:
=====================================================
== utcapture command after conntecting DTU
=====================================================
linux:/opt/SUNWut/sbin # ./utcapture
# TERMINALID TIMESTAMP TOTAL PACKET TOTAL LOSS BYTES SENT
PERCENT LOSS LATENCY
No desktops found
No desktops found
No desktops found
No desktops found
No desktops found
No desktops found
No desktops found
Authentication Manager timeout
=====================================================
== utgstatus after conntecting DTU
=====================================================
linux:/opt/SUNWut/sbin # ./utgstatus
Error: Could not get gstatus information from server linux
=====================================================
== /var/log/messages after connecting DTU
=====================================================
Mar 9 09:48:10 linux dhcpd: DHCPDISCOVER from 00:14:4f:0e:92:47 via eth0
Mar 9 09:48:11 linux dhcpd: DHCPOFFER on 192.168.0.19 to
00:14:4f:0e:92:47 via eth0
Mar 9 09:48:11 linux dhcpd: DHCPREQUEST for 192.168.0.19 (192.168.0.1)
from 00:14:4f:0e:92:47 via eth0
Mar 9 09:48:11 linux dhcpd: DHCPACK on 192.168.0.19 to
00:14:4f:0e:92:47 via eth0
Mar 9 09:48:13 linux utauthd: Worker3 NOTICE: CLAIMED by TerminalId.m0
NAME: TerminalId.00144f0e9247 PARAMETERS: {terminalIPA=192.168.0.19,
type=pseudo, fw=3.1_120879-05_2006.09.20.12.31, state=disconnected,
cause=insert, doamgh=true, barrierLevel=310, rawId=00144f0e9247,
MTU=1500, tokenSeq=1, firstServer=c0a80001, namespace=IEEE802,
ddcconfig=0, id=00144f0e9247,
clientRand=D.bvr1UKMZH5KwMqgHaSQ8mCNof7n6s2inajIr4FxMe, realIP=c0a80013,
useReal=true, event=insert, pn=39364, sn=00144f0e9247, rawType=pseudo,
hw=SunRayP8, initState=1, _=1}
Mar 9 09:48:13 linux utauthd: Worker3 NOTICE: CONNECT
IEEE802.00144f0e9247, TerminalId.00144f0e9247, explicit grant
Mar 9 09:48:13 linux utauthd: Worker3 NOTICE: MTU = 1500
Mar 9 09:48:13 linux utauthd: Worker3 NOTICE:
SessionManager.getSessionManager: Initiate callback to utsessiond at
localhost:7007
Mar 9 09:48:13 linux utauthd: Worker3 NOTICE:
SessionManager.initiateCallback localhost:7010 established communication
Mar 9 09:48:31 linux utcapture: getAuthMgrRecords(): poll timed out
Mar 9 09:49:17 linux usersession: getAuthMgrRecords(): poll timed out
Mar 9 09:49:17 linux usersession: set_state(): failed to contact authd
(Authentication Manager timeout)
Mar 9 09:49:40 linux status: get_current_list(): poll timed out
Mar 9 09:49:45 linux status: get_current_list(): poll timed out
Mar 9 09:49:51 linux status: getAuthMgrRecords(): poll timed out
Mar 9 09:49:51 linux status: set_state(): failed to contact authd
(Authentication Manager timeout)
Mar 9 09:50:12 linux utgstatus: get_gstatus(): Poll timed out
Mar 9 09:50:27 linux utsession: getAuthMgrRecords(): poll timed out
Mar 9 09:50:27 linux utsession: set_state(): failed to contact authd
(Authentication Manager timeout)
SO! It seems that DHCP server works fine, without any problem. When I
check the DHCP status it returns the following information:
=====================================================
== utquery command after connecting DTU
=====================================================
linux:/opt/SUNWut/sbin # ./utquery -d 192.168.0.19
terminalID=00144f0e9247
terminalIPA=192.168.0.19
model=SunRayP8
Subnet=255.255.255.0
Router=192.168.0.1
MTU=1500
Broadcst=192.168.0.255
LeaseTim=86400
DHCPServer=192.168.0.1
AuthSrvr=192.168.0.1
AuthPort=7009
LogHost=192.168.0.1
FwSrvr=192.168.0.1
NewTVer=3.1_120879-05_2006.09.20.12.31
parmsVersion=3.1_120879-05_2006.09.20.12.31
parmsBarrier=310
currentAuth=192.168.0.1
currentFW=3.1_120879-05_2006.09.20.12.31
currentBarrier=310
currentBarrierLevel=310
AltAuth=192.168.0.1,255.255.255.255
dname=site
_______________________________________________
SunRay-Users mailing list
[email protected]
http://node1.filibeto.org/mailman/listinfo/sunray-users
