On Wed, Dec 3, 2008 at 4:13 AM, Detlev Habicht <[EMAIL PROTECTED]> wrote: > Well, > we are using one V480, one V440 and one V880 for the SunRays-Server Cluster.
That's a lot of horsepower. I run a v480 and the sessions are all solaris with a bit of rdesktop and/or uttsc in the mix. Typically I have 4 active users with a peak of 6 devices + streaming audio + printers. It is not unusual to see 0.3 as average load even with backup running. This box is also my fileserver, database server etc... I could easily serve 16-20 concurrent users on that machine. > We have here one Cisco Catalyst 6500 and 48 SunRays are connected > to one Modul of the switch. The other on a second modul. > I think, i used the command "set port host" > on all ports - but i will check it again. > > Packet loss, what is normal? > > I just looked inside and see something like this: You'd have to let it run for a while. It'll show percentages. Ideally you would want 0 :) but I see about 0.9% here which seems pretty high. So I do have a problem with my cisco switch afterall.. > TERMINALID TIMESTAMP TOTAL PACKET TOTAL LOSS BYTES SENT PERCENT > LOSS LATENCY > 00144fa65a63 20081203095712 63579 9 5236812 > 11.111 > 00144fd16bc8 20081203095712 1641 12 1818810 > 1.628 > 0003babb875e 20081203095727 60144 7 4979090 > 11.111 > What is normal? When i have to panic? :-) Right about now :) _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
