Detlev Habicht wrote:
Well,
we are using one V480, one V440 and one V880 for the SunRays-Server
Cluster.
Normally our guys are using the Remote Login feature to login in our
Linux hosts (three X4600M2). Our big jobs are running on the linux hosts.
We are in the moment not so much people here. I have over 50 SunRays
connected,
but normally are only 20-30 in use.
Only a few people are using a Solaris desktop - so our Solaris hosts
are normally idle (when you test it with top or w). The Solaris hosts
have Gigabit interfaces on both sides (i use a dedicated net).
We have here one Cisco Catalyst 6500 and 48 SunRays are connected
to one Modul of the switch. The other on a second modul.
I think, i used the command "set port host"
on all ports - but i will check it again.
Packet loss, what is normal?
Essentially 0. There is a known issue with some switches using Gbps
links to the servers. They don't buffer UDP traffic very well. If you're
running 4.1, you can add "set hires_tick = 1" to /etc/system and reboot
the server(s). If that doesn't work, you should try setting the speed on
the server link to 100 Mbps.
Kent
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
