The fix is only for the latest patches/firmware... you must have 

SRSS 4.1 or SRSS 4.0 with patch -04

and it does work on Solaris x86

On Dec 2, 2008, at 3:13 PM, Darrel Hankerson wrote:

Craig Bender writes:

  What does utcapture show?  Recently we had a NetGear GigE switch at a
  trade show.  Dropped packets like crazy.  Brought in a cheap CompUSA
  100 TX switch and all the problems went away.

I've seen many posts (and some from me) on packet loss with certain
switches.  In our case, it was Cisco, and Cisco and Sun blamed
eachother.  We tried various wiring and port speeds, with some help
for the Ray 1 or the Ray 2 (but not both).  We routinely had packet
loss over 20%, at which point the desktop is mostly unresponsive.

For Rays in the same bldg as our server, we inserted $50 Netgear Gb/s
switches and worked around the problem.  Our server is an X4200.

  Noted that you did /etc/system work-around, did you reboot?  (required)

I gather that this is the timer workaround.  Does this apply pre-SRSS4
(and on Solaris/x86)?

--
--Darrel Hankerson [EMAIL PROTECTED]
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users

Brad Lackey
Desktop Virtualization Technology Lead
US Software Practice
(720) 548-3339
[EMAIL PROTECTED]

BEGIN:VCARD
VERSION:3.0
N:Lackey;Brad;;;
FN:Brad Lackey
ORG:Sun Microsystems;
TITLE:US-SW Desktop Virtualization Technology Lead
EMAIL;type=INTERNET;type=WORK;type=pref:[EMAIL PROTECTED]
TEL;type=WORK;type=pref:720-548-3339
TEL;type=CELL:303-875-8616
TEL;type=WORK;type=FAX:(720) 548-3339
item1.ADR;type=WORK;type=pref:;;13320 Racquet Ct.;Poway;CA;92064;United States of America
item1.X-ABADR:us
CATEGORIES:Personal
X-ABUID:57E6612B-F276-4934-9C7A-CC683249EDB1\:ABPerson
END:VCARD

_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users

Reply via email to