Hi
See output of your require.
----------------------------------------------------------------------------
---------------------------------
-bash-3.00# dhtadm -P
Name Type Value
==================================================
0100212839FFBD Macro
:NewTVer="GUI4.1_50_2008.09.25.12.37":
SunRay Macro
:LeaseTim=86400:LeaseNeg:AuthPort=7009:LogHost=192.168.0.103:LogKern=6:LogNe
t=6:LogUSB=6:LogVid=6:LogAppl=6:
sunpak08 Macro
:BootSrvA=192.168.0.103:BootFile="nbp.sunpak08":Include=192.168.0.0:
sunpak07 Macro
:BootSrvA=192.168.0.103:BootFile="nbp.sunpak07":Include=192.168.0.0:
192.168.0.0 Macro
:Subnet=255.255.255.0:Router=192.168.0.36:Broadcst=192.168.0.255:
sunfire01 Macro
:Include=Locale:Timeserv=192.168.0.103:LeaseTim=84600:LeaseNeg:DNSdmain="i2c
.com":DNSserv=2.2.2.47:
Locale Macro :UTCoffst=18000:
BarrierLevel Symbol Vendor=SUNW.NewT.SUNW,36,NUMBER,4,1
NewTFlags Symbol Vendor=SUNW.NewT.SUNW,34,NUMBER,4,1
Intf Symbol Vendor=SUNW.NewT.SUNW,33,ASCII,1,0
FWSrvr Symbol Vendor=SUNW.NewT.SUNW,31,IP,1,1
LogAppl Symbol Vendor=SUNW.NewT.SUNW,29,NUMBER,1,1
LogVid Symbol Vendor=SUNW.NewT.SUNW,28,NUMBER,1,1
LogUSB Symbol Vendor=SUNW.NewT.SUNW,27,NUMBER,1,1
LogNet Symbol Vendor=SUNW.NewT.SUNW,26,NUMBER,1,1
LogKern Symbol Vendor=SUNW.NewT.SUNW,25,NUMBER,1,1
LogHost Symbol Vendor=SUNW.NewT.SUNW,24,IP,1,1
NewTBW Symbol Vendor=SUNW.NewT.SUNW,30,NUMBER,4,1
NewTVer Symbol Vendor=SUNW.NewT.SUNW,23,ASCII,1,0
AuthPort Symbol Vendor=SUNW.NewT.SUNW,22,NUMBER,2,1
AltAuth Symbol Vendor=SUNW.NewT.SUNW,35,IP,1,0
AuthSrvr Symbol Vendor=SUNW.NewT.SUNW,21,IP,1,1
-bash-3.00#
----------------------------------------------------------------------------
---------------------------------
-bash-3.00# ./utquery -d 192.168.150.21
terminalID=00212839ffbd
terminalIPA=192.168.150.21
model=SunRayP8
currentAuth=192.168.0.103
currentFW=4.1_50_2008.09.25.12.37
currentBarrier=325
currentBarrierLevel=325
currentMTU=1500
Subnet=255.255.255.0
Router=192.168.150.1
LeaseTim=-1
DHCPServer=192.168.180.27
INFORMServer=192.168.180.27
FWservType=none
configMTU=1500
AltAuth=192.168.0.103
stopqon=0
bandwidth=100000000
-bash-3.00#
----------------------------------------------------------------------------
---------------------------------
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Kent Peacock
Sent: Friday, April 03, 2009 2:47 AM
To: SunRay-Users mailing list
Subject: Re: [SunRay-Users] Ctrl+Break+ S keys not working
Never mind the caps thing. The script forces to upper case. Just send
the output of dhtadm -P, and utquery on the Sun Ray after it's been reset.
Kent
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
