Hi
I am using below commands to firmware server in dhcp.
#option 66 ip 192.168.0.103
Please see if I am using correct option. In utquery I can still see
FWservType=none . What it means. How can I make sure that Sun Ray server is
able to offer update firmware.
-bash-3.00# /opt/SUNWut/sbin/utquery -d 192.168.150.21
terminalID=00212839ffbd
terminalIPA=192.168.150.21
model=SunRayP8
currentAuth=192.168.0.103
currentFW=4.1_50_2008.09.25.12.37
currentBarrier=325
currentBarrierLevel=325
currentMTU=1500
Subnet=255.255.255.0
Router=192.168.150.1
LeaseTim=-1
DHCPServer=192.168.180.27
INFORMServer=192.168.180.27
tftpSrvr=ˬ
FWservType=none
configMTU=1500
AltAuth=192.168.0.103
stopqon=0
bandwidth=100000000
-bash-3.00#
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Friday, April 03, 2009 3:02 AM
To: Nadeem Ahmad
Cc: 'SunRay-Users mailing list'
Subject: Re: [SunRay-Users] Ctrl+Break+ S keys not working
Your Sun Ray has no firmware server specified, so it doesn't know to try
to get the firmware from your server. I can't really recommend what to
do because I don't know your network topology. The easiest way might be
to add a value for option 66 on your DHCP service, at 192.168.180.27.
It's value should be the IP address of the firmware server. (It could be
its hostname, but you don't seem to have DNS configured.)
Kent
On 04/02/09 14:51, Nadeem Ahmad wrote:
>
> Hi
>
> See output of your require.
>
>
----------------------------------------------------------------------------
> ---------------------------------
> -bash-3.00# dhtadm -P
> Name Type Value
> ==================================================
> 0100212839FFBD Macro
> :NewTVer="GUI4.1_50_2008.09.25.12.37":
> SunRay Macro
>
:LeaseTim=86400:LeaseNeg:AuthPort=7009:LogHost=192.168.0.103:LogKern=6:LogNe
> t=6:LogUSB=6:LogVid=6:LogAppl=6:
> sunpak08 Macro
> :BootSrvA=192.168.0.103:BootFile="nbp.sunpak08":Include=192.168.0.0:
> sunpak07 Macro
> :BootSrvA=192.168.0.103:BootFile="nbp.sunpak07":Include=192.168.0.0:
> 192.168.0.0 Macro
> :Subnet=255.255.255.0:Router=192.168.0.36:Broadcst=192.168.0.255:
> sunfire01 Macro
>
:Include=Locale:Timeserv=192.168.0.103:LeaseTim=84600:LeaseNeg:DNSdmain="i2c
> .com":DNSserv=2.2.2.47:
> Locale Macro :UTCoffst=18000:
> BarrierLevel Symbol
Vendor=SUNW.NewT.SUNW,36,NUMBER,4,1
> NewTFlags Symbol
Vendor=SUNW.NewT.SUNW,34,NUMBER,4,1
> Intf Symbol Vendor=SUNW.NewT.SUNW,33,ASCII,1,0
> FWSrvr Symbol Vendor=SUNW.NewT.SUNW,31,IP,1,1
> LogAppl Symbol
Vendor=SUNW.NewT.SUNW,29,NUMBER,1,1
> LogVid Symbol
Vendor=SUNW.NewT.SUNW,28,NUMBER,1,1
> LogUSB Symbol
Vendor=SUNW.NewT.SUNW,27,NUMBER,1,1
> LogNet Symbol
Vendor=SUNW.NewT.SUNW,26,NUMBER,1,1
> LogKern Symbol
Vendor=SUNW.NewT.SUNW,25,NUMBER,1,1
> LogHost Symbol Vendor=SUNW.NewT.SUNW,24,IP,1,1
> NewTBW Symbol
Vendor=SUNW.NewT.SUNW,30,NUMBER,4,1
> NewTVer Symbol Vendor=SUNW.NewT.SUNW,23,ASCII,1,0
> AuthPort Symbol
Vendor=SUNW.NewT.SUNW,22,NUMBER,2,1
> AltAuth Symbol Vendor=SUNW.NewT.SUNW,35,IP,1,0
> AuthSrvr Symbol Vendor=SUNW.NewT.SUNW,21,IP,1,1
> -bash-3.00#
>
----------------------------------------------------------------------------
> ---------------------------------
> -bash-3.00# ./utquery -d 192.168.150.21
> terminalID=00212839ffbd
> terminalIPA=192.168.150.21
> model=SunRayP8
> currentAuth=192.168.0.103
> currentFW=4.1_50_2008.09.25.12.37
> currentBarrier=325
> currentBarrierLevel=325
> currentMTU=1500
> Subnet=255.255.255.0
> Router=192.168.150.1
> LeaseTim=-1
> DHCPServer=192.168.180.27
> INFORMServer=192.168.180.27
> FWservType=none
> configMTU=1500
> AltAuth=192.168.0.103
> stopqon=0
> bandwidth=100000000
> -bash-3.00#
>
----------------------------------------------------------------------------
> ---------------------------------
>
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Kent Peacock
> Sent: Friday, April 03, 2009 2:47 AM
> To: SunRay-Users mailing list
> Subject: Re: [SunRay-Users] Ctrl+Break+ S keys not working
>
> Never mind the caps thing. The script forces to upper case. Just send
> the output of dhtadm -P, and utquery on the Sun Ray after it's been reset.
>
> Kent
> _______________________________________________
> SunRay-Users mailing list
> [email protected]
> http://www.filibeto.org/mailman/listinfo/sunray-users
>
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
