Joe Reid wrote:
Craig Bender wrote:
-A does not give out IP by default, as it's for LAN based connections
that assume you already have DHCP Server. You'd have to answer N to
accept as is prompt if you want to give out IP/Subnet/router/etc
yes, I did that, just like always. I think I've found an error, let me
reinstall fresh again and see if it repeats.
Here's the error:
Selected values for subnetwork "192.168.100.0"
net mask: 255.255.255.0
first unit address: 192.168.100.65
last unit address: 192.168.100.254
auth server list: 192.168.100.13
firmware server: 192.168.100.13
router: 192.168.100.1
Accept as is? ([Y]/N): y
Error: unable to get information on primary interface
Error: unable to get information on the primary interface.
### Configuring firmware version for Sun Ray
Error: cannot set firmware version to network macro "192.168.100.0":
Configuration for DHCP subnet 192.168.100.0 does not exist.
I know networking works, I'm sending this email from this host.
--
joe
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
