Corona P9 is Sun Ray 2 family firware. P10 is the rev for Sun Ray 3 and
you'll need the latest patch from SRSS 4.2.
4.1 does not contain P10 (Sun Ray 3) firmware.
On 11/30/10 10:23 AM, Paul Whitener wrote:
So I just ran in the latest 4.1 patch I could find, 139549-07, rebooted,
noticed the CoronaP9 stuff showed up. Then I ran the following:
bash-3.2# ./utfwload -L
Upgrading units to version GUI4.2_17_2009.06.24.11.48:
5.0 ???? 192.168.128.202 P9.0021288fe0b2 MfgPkg_5.01_4.2_2010.03.16.12.44
Sun Ray 3 still has same firmware, MfgPkg_5.01_4.2_2010.03.16.12.44,
with no gui in sight!
thoughts and thanks!
/paul
-----Original Message-----
From: Bob Doolittle
Sent: Nov 30, 2010 11:13 AM
To: SunRay-Users mailing list
Subject: Re: [SunRay-Users] Sun Ray 3 GUI_firmware interesting delima
But you can't force downgrading firmware of new hardware which
didn't have firmware available ever before!
There was no firmware available for the new line in SRSS 4.2,
because it didn't exist yet. As Craig suggested, your only recourse
is to apply a patch which contains newer firmware, which will
include GUI firmware.
-Bob
On 11/30/10 10:55, James Kissler wrote:
Paul, you can force a firmware update, even if downgrading to an older
firmware version. I believe the flag to be used in the command line. I
would suggest pulling the firmware from one of the newer updates srss
updates to replace your current firmare repository. That's the easiest/best
solution in my opinion.
On Nov 30, 2010 8:42 AM, "Paul Whitener"<[email protected]> wrote:
Greetings all,
After waiting over a month for the delivery, our first 2 Sun Ray 3s came in.
A 3 and a 3+.
Now I have an interesting problem. I am running a 4.2 SRSS server on
OpenSolaris b_108 (which has been rock solid BTW). Since the DTUs default
to non_gui_firmware, I always connect them to a dedicated lan and let them
re-flash to GUI_firmware.
Problem is, the SRSS server firmware is at a lower rev than the new DTUs and
they will not flash. So GUI_firmware will not turn on. Is there a keyboard
combo (all be it undocumented) that will turn on the GUI_firmware menus for
me? Otherwise I will have to build a new SRSS server. (I think I already
know the answer, but thought I would give it a shot!)
Thanks in advance!
/paul
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
