Thanks Craig. it is in 139549-07 4.1 patch. I had to do a force to get it to take using:
./utfwadm -A -n nge0 -a -f /opt/SUNWut/lib/firmware_gui Thanks for the help all! -----Original Message----- >From: Craig Bender <[email protected]> >Sent: Nov 30, 2010 1:33 PM >To: Paul Whitener <[email protected]>, SunRay-Users mailing list ><[email protected]> >Subject: Re: [SunRay-Users] Sun Ray 3 GUI_firmware interesting delima > >Corona P9 is Sun Ray 2 family firware. P10 is the rev for Sun Ray 3 and >you'll need the latest patch from SRSS 4.2. > >4.1 does not contain P10 (Sun Ray 3) firmware. > >On 11/30/10 10:23 AM, Paul Whitener wrote: >> So I just ran in the latest 4.1 patch I could find, 139549-07, rebooted, >> noticed the CoronaP9 stuff showed up. Then I ran the following: >> >> >> bash-3.2# ./utfwload -L >> Upgrading units to version GUI4.2_17_2009.06.24.11.48: >> 5.0 ???? 192.168.128.202 P9.0021288fe0b2 MfgPkg_5.01_4.2_2010.03.16.12.44 >> >> Sun Ray 3 still has same firmware, MfgPkg_5.01_4.2_2010.03.16.12.44, >> with no gui in sight! >> >> thoughts and thanks! >> >> /paul >> >> -----Original Message----- >> From: Bob Doolittle >> Sent: Nov 30, 2010 11:13 AM >> To: SunRay-Users mailing list >> Subject: Re: [SunRay-Users] Sun Ray 3 GUI_firmware interesting delima >> >> But you can't force downgrading firmware of new hardware which >> didn't have firmware available ever before! >> >> There was no firmware available for the new line in SRSS 4.2, >> because it didn't exist yet. As Craig suggested, your only recourse >> is to apply a patch which contains newer firmware, which will >> include GUI firmware. >> >> -Bob >> >> On 11/30/10 10:55, James Kissler wrote: >>> Paul, you can force a firmware update, even if downgrading to an older >>> firmware version. I believe the flag to be used in the command line. I >>> would suggest pulling the firmware from one of the newer updates srss >>> updates to replace your current firmare repository. That's the >>> easiest/best >>> solution in my opinion. >>> >>> On Nov 30, 2010 8:42 AM, "Paul Whitener"<[email protected]> >>> wrote: >>> >>> Greetings all, >>> >>> After waiting over a month for the delivery, our first 2 Sun Ray 3s >>> came in. >>> A 3 and a 3+. >>> >>> Now I have an interesting problem. I am running a 4.2 SRSS server on >>> OpenSolaris b_108 (which has been rock solid BTW). Since the DTUs >>> default >>> to non_gui_firmware, I always connect them to a dedicated lan and let >>> them >>> re-flash to GUI_firmware. >>> >>> Problem is, the SRSS server firmware is at a lower rev than the new >>> DTUs and >>> they will not flash. So GUI_firmware will not turn on. Is there a >>> keyboard >>> combo (all be it undocumented) that will turn on the GUI_firmware menus >>> for >>> me? Otherwise I will have to build a new SRSS server. (I think I >>> already >>> know the answer, but thought I would give it a shot!) >>> >>> Thanks in advance! >>> >>> /paul >>> >>> >>> _______________________________________________ >>> SunRay-Users mailing list >>> [email protected] >>> http://www.filibeto.org/mailman/listinfo/sunray-users >>> >>> >>> _______________________________________________ >>> SunRay-Users mailing list >>> [email protected] >>> http://www.filibeto.org/mailman/listinfo/sunray-users >> >> >> >> >> _______________________________________________ >> SunRay-Users mailing list >> [email protected] >> http://www.filibeto.org/mailman/listinfo/sunray-users _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
