On Mon, 2012-02-27 at 12:05 +0100, Volker A. Brandt wrote: > > After setting utfwadm -AaV -G none > > > > the *parms* file include the enablegui setting, the sunrays load the > > firmware from the server, the enableGui file in /tftpboot gets > > created but stop+m/stop+s do not show the gui on the clients (after > > power-cycle) > > > > I have verified that the clients load the correct firmware from the > > right server (currently they are within an isolated subnet anyway) > > being "4.3_146928-05_2011.12.19.17.08" > > I have the same problem, but > > - I am using 5.2.1 > - the problem occurs with a 2FS > - the DTU is not even retrieving the parms file (checked with snoop) > > I am still investigating. The next step is setting up the "old-style" > DHCP provisioning, but I haven't had a chance to do that yet. > > > Regards -- Volker
Interesting i just managed to "reproduce this issue" on my 2FS in the TestLab as well, on which (i am certain) the pop-gui worked a few weeks ago (i remember resetting to defaults via gui). I did have an upgrade from 4.2 to 5.2.5 recently. Pop-up gui does not appear neither anymore, at least i can debug this locally now. Will sniff the connection to see if the parms file gets transmitted, good idea. update: this seems to be sunray client specific sunray1: pop-up gui works sunray2fs: pop-up gui does not work sunray270: pop-up gui does not work sunray3+: pop-up gui does not work sunray3: assume it works, since i did an installation (5.2.5) recently with sunray3 and enabled the gui at the customer site. so this seems to be a bug introduced in 5.x? Regards, Philipp -- IPS Gesellschaft für innovative EDV-Produkte und - Systeme GmbH Franzosengraben 10 A-1030 Wien Tel.: +43 1 796 86 86 - 53 Mobil: +43 664 3979491 E-Mail: [email protected] _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
