We have 5.2.5 with the "4.3_146928-05_2011.12.19.17.08" firmware installed with Sunray 3+ units and
the pop-up GUI seems to be working properly for us.
We typically enable the GUI for each Sunray type as follows:
/opt/SUNWut/sbin/utfwadm -A -a -V -G force -f /opt/SUNWut/lib/firmware/CoronaP8
/opt/SUNWut/sbin/utfwadm -A -a -V -G force -f /opt/SUNWut/lib/firmware/CoronaP9
/opt/SUNWut/sbin/utfwadm -A -a -V -G force -f /opt/SUNWut/lib/firmware/CoronaP10
(the -f <path> is likely redundant now that there is only one firmware)
On 02/27/12 06:30, Philipp Vymazal wrote:
On Mon, 2012-02-27 at 12:05 +0100, Volker A. Brandt wrote:
After setting utfwadm -AaV -G none
the *parms* file include the enablegui setting, the sunrays load the
firmware from the server, the enableGui file in /tftpboot gets
created but stop+m/stop+s do not show the gui on the clients (after
power-cycle)
I have verified that the clients load the correct firmware from the
right server (currently they are within an isolated subnet anyway)
being "4.3_146928-05_2011.12.19.17.08"
I have the same problem, but
- I am using 5.2.1
- the problem occurs with a 2FS
- the DTU is not even retrieving the parms file (checked with snoop)
I am still investigating. The next step is setting up the "old-style"
DHCP provisioning, but I haven't had a chance to do that yet.
Regards -- Volker
Interesting i just managed to "reproduce this issue" on my 2FS in the
TestLab as well, on which (i am certain) the pop-gui worked a few weeks
ago (i remember resetting to defaults via gui). I did have an upgrade
from 4.2 to 5.2.5 recently. Pop-up gui does not appear neither anymore,
at least i can debug this locally now. Will sniff the connection to see
if the parms file gets transmitted, good idea.
update: this seems to be sunray client specific
sunray1: pop-up gui works
sunray2fs: pop-up gui does not work
sunray270: pop-up gui does not work
sunray3+: pop-up gui does not work
sunray3: assume it works, since i did an installation (5.2.5) recently
with sunray3 and enabled the gui at the customer site.
so this seems to be a bug introduced in 5.x?
Regards,
Philipp
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
