The correct utfwadm command to run varies based on how you ran utadm. What's the output of utadm -p and utadm -l?
/opt/SUNWut/sbin/utfwadm -A -a -V -G force is fine for LAN connections (utadm -L on) but won't help if you ran utadm -a/-A. Also, in the case of LAN connections, you must tell the Sun Ray where to find the firmware via DHCP option 66 or DNS entry of sunray-config-servers.fqdn, otherwise it will never upgrade. On Feb 27, 2012, at 6:45 AM, Philipp Vymazal <[email protected]> wrote: > yes, i had a mistake with sunray3+, for some reason i thought these were > the ones with the display. > > it seems though that it does not work on sunray3 (with one display > port). i had an installation recently with sunray3 (with 2 display > ports) where the popup-gui worked. i managed to confuse the different > types. > > this is kinda wierd. i can 100% confirm that i have this issue on the > sunrays available in my lab, namely being sunray2fs (2ports), sunray270 > and do not have the issue on an ancient sunray1. I will see if i can get > my hands on 2 different sunray3. > > Any Ideas were to start debugging/looking for a cause is welcome! :) > > Regards, > Philipp > > > > > > On Mon, 2012-02-27 at 09:35 -0500, Sean Walmsley wrote: >> We have 5.2.5 with the "4.3_146928-05_2011.12.19.17.08" firmware installed >> with Sunray 3+ units and >> the pop-up GUI seems to be working properly for us. >> >> We typically enable the GUI for each Sunray type as follows: >> >> /opt/SUNWut/sbin/utfwadm -A -a -V -G force -f >> /opt/SUNWut/lib/firmware/CoronaP8 >> /opt/SUNWut/sbin/utfwadm -A -a -V -G force -f >> /opt/SUNWut/lib/firmware/CoronaP9 >> /opt/SUNWut/sbin/utfwadm -A -a -V -G force -f >> /opt/SUNWut/lib/firmware/CoronaP10 >> >> (the -f <path> is likely redundant now that there is only one firmware) >> >> >> On 02/27/12 06:30, Philipp Vymazal wrote: >>> On Mon, 2012-02-27 at 12:05 +0100, Volker A. Brandt wrote: >>>>> After setting utfwadm -AaV -G none >>>>> >>>>> the *parms* file include the enablegui setting, the sunrays load the >>>>> firmware from the server, the enableGui file in /tftpboot gets >>>>> created but stop+m/stop+s do not show the gui on the clients (after >>>>> power-cycle) >>>>> >>>>> I have verified that the clients load the correct firmware from the >>>>> right server (currently they are within an isolated subnet anyway) >>>>> being "4.3_146928-05_2011.12.19.17.08" >>>> >>>> I have the same problem, but >>>> >>>> - I am using 5.2.1 >>>> - the problem occurs with a 2FS >>>> - the DTU is not even retrieving the parms file (checked with snoop) >>>> >>>> I am still investigating. The next step is setting up the "old-style" >>>> DHCP provisioning, but I haven't had a chance to do that yet. >>>> >>>> >>>> Regards -- Volker >>> >>> Interesting i just managed to "reproduce this issue" on my 2FS in the >>> TestLab as well, on which (i am certain) the pop-gui worked a few weeks >>> ago (i remember resetting to defaults via gui). I did have an upgrade >>> from 4.2 to 5.2.5 recently. Pop-up gui does not appear neither anymore, >>> at least i can debug this locally now. Will sniff the connection to see >>> if the parms file gets transmitted, good idea. >>> >>> update: this seems to be sunray client specific >>> >>> sunray1: pop-up gui works >>> sunray2fs: pop-up gui does not work >>> sunray270: pop-up gui does not work >>> sunray3+: pop-up gui does not work >>> sunray3: assume it works, since i did an installation (5.2.5) recently >>> with sunray3 and enabled the gui at the customer site. >>> >>> so this seems to be a bug introduced in 5.x? >>> >>> Regards, >>> Philipp >>> >>> >> _______________________________________________ >> SunRay-Users mailing list >> [email protected] >> http://www.filibeto.org/mailman/listinfo/sunray-users > > -- > IPS Gesellschaft für innovative EDV-Produkte und - Systeme GmbH > Franzosengraben 10 > A-1030 Wien > Tel.: +43 1 796 86 86 - 53 > Mobil: +43 664 3979491 > E-Mail: [email protected] > > _______________________________________________ > SunRay-Users mailing list > [email protected] > http://www.filibeto.org/mailman/listinfo/sunray-users _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
