Only if it's loaded, and only if you have a Sun Keyboard with a stop
key. ;) Ctrl+Pause+M otherwise.
Stop V or Ctrl+Pause+V will display the version.
Stop C or Ctrl+Pause+C will clear out any information entered in the GUI
FW, that is of course, if it's loaded.
There's is no "factory reset" per se, there's just loading firmware.
Worst case, you can set up a private interconnect and load firmware on
this unit.
On 5/22/12 7:25 AM, Clift, Tom CIV NSWCDD, K55 wrote:
I think the Stop+M will get you to the gui menu.
------------------------------------------------------------------------
*From:* Jeremy Loukinas
*Sent:* Tue 5/22/2012 9:51 AM
*To:* [email protected]
*Subject:* [SunRay-Users] Sunray 2fs reset to factory
I have a Sunray 2fs I picked up off Ebay that is manually pointing to a
server I do not have. Machine boots up ok picks up DHCP then goes onto
look for a 66.22.x.x. address that isn't even on my network. Tried the
shift + props keys, tried ctrl M ctrl S.. Can't seem to get a GUI Menu
to make any changes. Is there a way to reset this thing to factory
defaults?
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
