On 8/19/02 5:07 AM, "Will S" <[EMAIL PROTECTED]> wrote: > >> Date: Sun, 18 Aug 2002 20:18:27 -0400 >> Subject: Re: [SM] J38 jumper on S900 >> >> >> Thank's Mad Dog, I believe I found it just above ram slot A1 and between >> The XLR8 heatsink. 2 Silver "nubs" right? Indulge me please... You mentioned >> "I just solder in the jumper myself (parts from digikey)" what are you >> referring to? Wouldn't I just "blend" the 2 "nubs" together w/solder. >> Thank's again, Phil >> > If you are lucky enough to have a machine with the rare jumper pins > don't bend anything. Use a jumper pin like from a hard drive. PC > shops will have these if you don't have any extras. Will S
Will, the Jumper pins will have to be purchased. I found the part #'s >From an earlier post. I have 3 Questions. 1. Should I remove the Board to access and install the pins. 2. What type of soldering Tool do you recommend 3. Is it worth all this, for a slight performance gain or is it? -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
