Hi all, I have a SCSI problem and am looking for ideas. My machine is a S900 with Sonnet G3 500 with 544MB Ram, Twin Turbo (8)Video Card. It originally had the E100 card and a 4.5 GB UW drive and a 24x CD ROM(non bootable). It all worked fine. I am preparing for OSX so I added an ATTO UW SCSI card and a 9 GB IBM UW drive, as well as an apple 600i CD ROM. So here is my problem, my CD ROM drive is not being read when connected to the internal SCSI on the motherboard. Not only that but when I have the CD ROM connected to the internal SCSI on the motherboarad and start my computer, it won't read my UW SCSI. If I connect the CD ROM to the 50 PIN connector on the ATTO, it doesn't read anything (only one light on the card is on). When I disconnect the SCSI from the motherboard connector, the computer boots up fine using the UW SCSI drive. I have the UWs formatted with Intechs SW. My goal is to have a bootable CD ROM working and to load Jaguar on the 9GB UW and leave OS 9.1 on the 4.5 GB drive. Any suggestions?
Thanks JW -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
