At 09:55 +0000 11/14/2002, pdimage.fsnet.co.uk wrote: > The floppy bay will take a HD with a little customisation but what >about the floppy cable - does it just hang free or should it have some >kind of termination?
Just disconnect the cable from the motherboard and store it somewhere. > The bottom bay is a bit of a headache to get a HD in and - presuming >that I need a couple of extra long screws to secure it to the front of >the case - where can I get these screws from? They seem to be american >thread. I bought some of those when I built machines from empty J700 cases from Small Dog a year or so ago. Unfortunately, I did not note down the exact size. The thickness is #6 or #6 - 32 as that's the thread and size that screws into the holes in the bottom of standard hard drives. The length is what I'm unsure about. It's 1" or 1.25" I think. Are these difficult to find in the UK? Any hardware store that carries fasteners stocks them here, but we've barely made a baby step towards metric despite good intentions starting three decades ago. Jeff Walther -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:supermacs@;mail.maclaunch.com> To unsubscribe, email: <mailto:supermacs-off@;mail.maclaunch.com> For digest mode, email: <mailto:supermacs-digest@;mail.maclaunch.com> Subscription questions: <mailto:listmom@;lemlists.com> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
