At 10:40 +0000 11/15/2002, pdimage.fsnet.co.uk wrote:
>Jeff W wrote...
>
>>Just disconnect the cable from the motherboard and store it somewhere.
>
>      Thanks Jeff but isn't that a motherboard removal to get at it? My
>cable disappears around the back of the motherboard and is insulated from
>the case by a slip of waxy brown paper??? Isn't there a simple plug (read
>plug lazy) terminator?

Right.  My bad.  I forgot that thing is routed under the MB.  It's 
very neatly done, though.   Okay, I would, if you can, unplug it at 
the motherboard.  The plug is near the rear right (top) of the 
motherboard.  The plug, at least, is on the top side of the 
motherboard.   Then leave the cable in the case.

If you can't manage that, I'd just leave it alone.  The floppy 
controller probably won't care if there's extra cable dangling there, 
and it's not like there's anything else on the floppy cable bus which 
is going to malfunction.  There's a small chance that all that extra 
cable could result in extraneous signals to the floppy controller, 
hence, a paranoid person would unplug the cable, but I think its 
unlikely.

Jeff Walther

-- 
SuperMacs is sponsored by <http://lowendmac.com/> and...

 Small Dog Electronics    http://www.smalldog.com  | Refurbished Drives |
 Service & Replacement Parts   [EMAIL PROTECTED]  |  & CDRWs on Sale!  |

      Support Low End Mac <http://lowendmac.com/lists/support.html>

SuperMacs list info:    <http://lowendmac.com/supermacs/list.shtml>
  --> AOL users, remove "mailto:";
Send list messages to:  <mailto:supermacs@;mail.maclaunch.com>
To unsubscribe, email:  <mailto:supermacs-off@;mail.maclaunch.com>
For digest mode, email: <mailto:supermacs-digest@;mail.maclaunch.com>
Subscription questions: <mailto:listmom@;lemlists.com>
Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/>


---------------------------------------------------------------
>The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------


Reply via email to