> From: jazz4u2 <[EMAIL PROTECTED]> > Date: Tue, 25 Mar 2003 22:52:58 -0500 > > Hi > I just bought an UltraATA 133/100 Pro SIIG pci card. I was told it > will work in my S900. I bought a Maxtor 40Gig HD and it looks like it > has jumpers on it. Do I have to remove them in order for it to work in > my S900? Are there any specific things I must do to get it to work? > Many Thanks > Jacqueline Stewart
SIIG does indeed market an ATA 133 PCI card for MAC. It is made by Acard and Sonnet also sells the same card. So if the card says Mac on it fine but if it says anything about Windows on the box or anywhere it's the wrong one! I have found that most hard drives come setup to run as a Master drive or now days some are set to cable select. Master drive would be installed as the last drive on the IDE cable. I have by accident found cable select works fine in my machine. However some brands work a bit different then others and I have never used a Maxtor drive. later Will S -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
