"Darwin Sison" <[EMAIL PROTECTED]> wrote on 11/2/03 Hello All. After upgrading my S900 from a Newer Tech G3 275 to a XLR8 MAChCarrier G4 450, I could not use X anymore. I tried to reinstall but no luck yet. Has anyone had issues or solutions to get X to work or reinstall with the XLR8 G4 upgrade? So far, it's been stable under 9.1.
-Darwin I am using the XLR8 400 Mhz G3 and had no problems with the install on my S900. Suggest you use XPostfacto 3.0.a4 to install with. In the options panel set the throttle to 8 that might help. I had my 10X G3 clocked up to 500 Mhz and I just lowered it to 450 until I finished the install. I left the throttle at 0. Make sure your drive was formatted with the OS 9.1 drive setup, as FWB and even HDST don't work to well on a unsupported machine. Be sure to set the input to Keyboard and output to video card in the options panel as well as use verbose not single user. Before you click install make sure it is set to install from CD and that restart from your OS X volume. Good luck R. Barker -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
