I just installed a new WD HD (80 gigs) on my ATA 66 card in my
S900. (G4-450) When I had the new drive installed as the master and
the old 30 gig installed as the slave, the computer booted up from the
scsi drive with OS9.2 on it (I know the master/slave only works with 10)
and recognized the old drive set up as slave, but not the new 80 gig set
us as master. I took the old drive out and set the new drive up as
single. Now the computer won't even chime. I reset the cuda, and tried
zapping the pram. When I tried to zap the pram there were no chimes.
Any help would be greatly appreciated.
My wife hates it when I install new hardware. She says I spend
weeks cursing the machine until I get it up and running right.
Mike
--
SuperMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives |
Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/>
---------------------------------------------------------------
>The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------
