I'm trying to get a 68pin seagate st32430W scsi drive to work in my S900 but I'm having lots of troubles. The computer will not recognize it. This is my first attempt to use a 68 to 50 pin adaptor and thay may be what's wrong but I have a feeling that it has something to do with the jumpers. I've tried a few combinations for the jumpers but none seem to work. Could someone please look up the drive and explain where I should and shouldn't have jumpers in order to have the drive as a storage drive (not the primary boot drive nor the last drive/device on my scsi chain) in ID #1 or #6. Any help would be greatly appreciated. Thanks.
-Eric -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
