Jeff Walther wrote:
The connector at the top of the Umax card isn't really a jumper bank. It's a cable connector. When the cable is absent, those three jumpers are installed to compensate for the lack of a cable connected to a Gemini card. But there are no adjustments to be made at that connector.
--------
I have a spare s900 with a 604/225 card with the above mentioned connector point.
If you're facing the heatsink/fan side of the processor card, the far left side three are jumpered.
(There are a total of eight pairs of pins on this connector block.)
-- SuperMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com ---------------------------------------------------------------
