Hi, Continuing my previous e-mail, I managed to brick the camera after re-flashing with the 8.0.9 image. What I did was, as I had the new image accessible via NFS, at /var/tmp/nfs_test/, was the following:
cd /var/tmp/nfs_test ./nfs_update this made some checkes, some copies, and then it said: reboot, at the end. ever since, the camera doesn't work, meaning that none of the lights light up as the ethernet cable is plugged into it. (this is the same calbing that had it work before) I tried with the IP address I set, and also with the original IP address of 192.168.0.9. (of course, I've reset my laptops IP accordingly). I can get the lights on the camera to turn on if I plug-unplug-re-plug the ethernet cable in quick succession. but, the camera is still unreachable. also, at this time, while my presumption was that it would enter netboot mode, the lights behave the same as 'usual', the yellow one is permanently on, the green one blinks sporadically. how would I re-vitalize the camera? I'm looking at the netboot installs cript, but I see that it would call the etraxfsboot - but where would I get this from? (yes, I'm deliberately trying to avoid setting up a complete dev environment. IMHO a simple re-flashing of existing images should not require a full dev env, including cross-compilers & stuff. Akos _______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
