Can I ask you to send result from ls -R /nfs here pls ? Alexandre
On Wed, Nov 17, 2010 at 6:07 PM, Ákos Maróy <[email protected]> wrote: > On 17/11/10 19:14, Heinrich Mueller wrote: > > I was at this point, too. > > Does the netboot command yield any further output? > > Does it say "JUMP" at the end and the return value 0? > > no, it says only as I posted... > > > Connect a serial console (RS232 input at the side behind the cover) > > and look at the output, for example with ttylog or cutecom. > > how would I do that? I only have an RJ45 connector on this thing.. > > > Does it say anything regarding nfs? > > nope > > > How far does it boot? > > I wouldn't know :) > > > > What is your network configuration like? What does your exports file > > look like? > > $ cat /etc/exports > # /etc/exports: the access control list for filesystems which may be > exported > # to NFS clients. See exports(5). > # > # Example for NFSv2 and NFSv3: > # /srv/homes hostname1(rw,sync,no_subtree_check) > hostname2(ro,sync,no_subtree_check) > # > # Example for NFSv4: > # /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check) > # /srv/nfs4/homes gss/krb5i(rw,sync,no_subtree_check) > # > > /nfs 192.168.0.0/255.255.0.0(rw,sync,no_root_squash) > > network config: > > ifconfig 192.168.0.20 netmask 255.255.255.0 eth0 up > > > I can mount the nfs export from my laptop just fine.. > > > _______________________________________________ > Support-list mailing list > [email protected] > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
